| Hi Joaquin,
1. The 2944W is not orderable as a seperate part from the PCBU but is I
believe orderable from SBU, if you ask one of the SBU guys the SBU part ref
this may help you get the logistics num.
2. For a proper cluster HW config you do really need the 2944W (differential
SCSI giving 25Meters) + the cables, the Y cables and terminators if however
your just sticking a couple of boxes together and want to play with
cluster.........
3. you can get by with 2940W, the problem is the SCSI cable length which
for the 2940W is 3Meters from terminator to terminator.....if you have more
than 3 meters you can drop the bus frequency down to 5MHz which will give you
6meters.
There is an added problem with using 2940W, this being that depending upon the
BIOS rev it probably WON'T have the option to disable "SCSI bus initialization
on reset".......however if you don't turn off the servers !!. should be OK.
All the above in point 3 is NOT valid for a customer installation there are
kits avaliable.
Cheers John
[Posted by WWW Notes gateway]
|