T.R | Title | User | Personal Name | Date | Lines |
---|
1336.1 | Release Notes are unrestricted | TLE::RMEYERS | Randy Meyers | Thu Apr 14 1988 22:27 | 6 |
| Re: .0
I am sure that Lattice wouldn't mind anyone redistributing any files
found in the "public" areas of their BBS. Since the release notes
are in the public, not restricted, area, I am sure it would be all right
to post them.
|
1336.2 | I hope your right! | WJG::GUINEAU | | Fri Apr 15 1988 00:52 | 7 |
|
In that case:
WJG::AMIGA:AM4READ.ARC
John
|
1336.3 | .ARC files ok? | DECEAT::LANDINGHAM | Eschew obfuscation! | Fri Apr 15 1988 14:57 | 4 |
| My copy of ARC compiled for VMS seems to choke on the three
aforementioned arc files, especially GAZER2. Anyone else have any
problem with any of these? My experience is that if VMS ARC won't
handle a file, neither will Amy's ARC after downloading...
|
1336.4 | >-< | WJG::GUINEAU | | Sat Apr 16 1988 00:19 | 13 |
|
Looks like I forgot to turn off CONVERT. (funny, I never do to download)
Anyway, GAZER2 works just fine with the VMS ARC I have.
For some reason, CAMM and FORKTST have a few bytes skipped at the end. The files
at the end of each are just test or example, so try them anyway.
AM4READ.ARC is also there. This is the Lattice C 4.01 release notes.
I guess I had better go back to using a TK50 from home to office for uploads.
John
|
1336.5 | Thanks for posting it | GIDDAY::BAKER | | Tue Apr 19 1988 02:26 | 11 |
| John,
Thanks for uploading the V4.01 Release notes. I have the V3.03c
release but from Australia the connect charges to these sorts of
boards run to a few more dollars than I can afford. Good to know
what is in the newer Version.
Local calls, however, are not time-charged here.
Thanks,
John
|
1336.6 | 4.01 fix? | WJG::GUINEAU | | Tue Apr 19 1988 13:37 | 19 |
|
I did the upgrade this weekend. Took 2 or 3 hours to do 2 sets of disks (yeh,
I should have just done the originals (Lattice's recomendation) and
backed them up again...).
There is also a fix to 4.01 on Lattice BBS ! Apparently thier
CXBRK, CXOVF and STUB routines in 4.01 caused system crashes.
So I guess 4.01 is the latest, The 4.01 fix didn't change the version number!?
I didn't look at the source for those modules, may be that the 4.01
upgrade has them in it. On the Lattice BBS there were 2 files:
AMFIX400.ARC and AMFIX401.ARC
The fix400 was the upgrade and the fix401 had a readme that said apply this
to 4.01 (explaining about the crashes).
John
|