| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 406.1 | same one | MKNME::DANIELE | | Mon Oct 15 1990 12:08 | 8 |
| See note 386 for the location of the latest SNMP kit. This is
compatible with DECmcc BMS/Director 1.0 and beyond.
Remember, if you install DECmcc 1.1 over an existing system with
1.0 AND the SNMP AM, you will have to re-install the SNMP AM.
Regards,
Mike
|
| 406.2 | Installation Guide for SNMP AM? | OSLACT::BJORN | Once again | Tue Oct 16 1990 11:30 | 4 |
| 406.3 | generic ch 5 | MKNME::DANIELE | | Tue Oct 16 1990 12:07 | 11 |
| Chapter 5 of the installation guide/getting started DECmcc manual
is called "Installing Asynchronous Management Modules" or something
close to that. It is a generic guide to installing modules on top
of the Director/BMS, covering dictionary, parse table, help file
updates.
That's what the release notes are pointing to. I'm not sure where
the DECmcc doc is on line, but I think there's a note or two about it.
Regards,
Mike
|
| 406.4 | REGISTER SNMP, No response from entity | OSLACT::BJORN | Once again | Tue Oct 16 1990 13:42 | 29 |
| 406.5 | | MKNME::DANIELE | | Tue Oct 16 1990 15:17 | 9 |
| It's calling the AM with a "show snmp osclo all id".
As documented in the Use book, the exception you are seeing means
1. the target system has no SNMP agent running
2. the system has an agent, but won't accept SNMP packets
from your IP address with the community name of "public".
Mike
|
| 406.6 | SNMP AM access to agents | OSLACT::BJORN | Once again | Tue Oct 16 1990 19:52 | 9 |
| 406.7 | some info, not SNMP | MKNME::DANIELE | | Wed Oct 17 1990 12:21 | 31 |
| > Do SNMP AM include an SNMP agent?
No, DECmcc Director contains no agents.
> Is it possible from DECmcc SNMP to "show" information from DECmcc Director?
You can't get any information through the management protocols
like SNMP or CMIP, from the director. However, each management module
DOES have an interface for its own management information. For
example,
MCC> show mcc 0 tcpip_am all attributes
MCC 0 TCPIP_AM
ALL ATTRIBUTES
AT 17-OCT-1990 09:16:24
Component Identification = "DECmcc TCP/IP SNMP AM"
Component Version = V1.0.0
SNMP Optimization = True
UDP Retries = 2
UDP Timeout = 5
show you the operational characteristics of the TCP/IP SNMP
access module.
I'm not sure if I've answered your question. There is currently no
SNMP agent running on VMS that I know of, although ( at least ) 1 is
planned.
Mike
|
| 406.8 | UCX and SNMP agent | OSLACT::BJORN | Once again | Wed Oct 17 1990 18:01 | 7
|