| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
Hello DECmcc'ers,
I have to create the service interface of a simple AM (.MS file).
This AM should thereafter tell me - with the SHOW directive - in
which operating status (STOP or RUN) my entity currently is.
Dependent on its response, I will then possibly restart or stop
it with the directives ENABLE or DISABLE.
I went fairly through the chapter 4 of the "Mgmt. Module Progr."
manual but did not find an appropriate example. The VAXLSE with
the provided MSL template did not help me further either because
the placeholders are left up to you to fill out. I would appreciate
your help in the following:
1/ Could I specify a SHOW directive with two RESPONSE(s) since the
EXCEPTION does not fit well in that meaning here ?
2/ What do the ENABLE and DISABLE directive specifications look
like as I don't expect any RESPONSE, EXCEPTION, etc. from the
entity ?
Hope that I did not miss something here. Thanks.
Quoc
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 1908.1 | your node name is unknown??? | TOOK::MATTHEWS | Fri Dec 13 1991 15:34 | 8 | |
I tried to send you an MCC snippet as an example .ms.
However, your node name is not known to noted, anchor, or took.
Please, Identify yourself to me and let me know how I can get
the example to you.
wally
| |||||
| 1908.2 | Its there. | BSYBEE::EGOLF | John C. Egolf LKG2-2/T02 x226-7874 | Fri Dec 13 1991 16:00 | 10 |
Wally, BYENG0 is known to TOOK. 49.750 (BYENG0) BNA-0 4.378 (A04RT1) UFC Munich, Federal Republic of Germany - Application Center If you can't type BYENG0, then send to 50926:: JCE | |||||