[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference azur::mcc

Title:	DECmcc user notes file. Does not replace IPMT.
Notice:	Use IPMT for problems. Newsletter location in note 6187
Moderator:	TAEC::BEROUD

Created:	Mon Aug 21 1989
Last Modified:	Wed Jun 04 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	6497
Total number of notes:	27359

2945.0. "How to save MIR/ALARMS/EXPORT during upgrade?" by ZPOVC::RAMARAJ () Wed May 06 1992 16:07

    I'm currently using the 1.2.7 FT version on VMS and ULTRIX.
    
    I have registered alot of node4, snmp, bridges, fddi, conc, 
    terminal servers, ethernet and alot of entities.  I also have alot alarms 
    and exporting for them too.
    
    How can I save all the MIRs, exportings, alarms etc  for all entities 
    that I currently have, when I upgrade to another FT version or the SSB 
    version.
    
    Is there a way to save the relevant file and use them after an upgrade?
    I'm sure alot of folks out there would need such an utility.
    
    Thank in advance for any hints or help
    
    Raj
    Singapore

T.R	Title	User	Personal Name	Date	Lines
2945.1	Alarms has an extraction tool	MOLAR::ROBERTS	Keith Roberts - DECmcc Toolkit Team	`Wed May 06 1992 17:33`	17
	RE: .0 >> How can I save all the MIRs, exportings, alarms etc for all entities >> that I currently have, when I upgrade to another FT version or the SSB >> version. Raj, For Alarms you can use the Extract Rules Tool, which will extract all of the Alarm Rules from the Alarms MIR .. and create a script to reload the MIR at a later time. VMS: run sys$system:mcc_alarms_extract_rules Ultrix: mcc_alarms_extract_rules /keith
2945.2	will upgrade wipe out alarm rules?	SWORD1::KENNEDY	MaryEllen - CTE	`Tue May 12 1992 22:42`	3
	Do you really have to do this before upgrading??? Not a user-friendly feature. _Mek
2945.3	Not too bad on VMS.	TOOK::MINTZ	Erik Mintz, DECmcc Development, dtn 226-5033	`Wed May 13 1992 01:54`	6
	On VMS, I think the installation procedure will do the extract rules for you. On ULTRIX, which is essentially a V1 product for us, there is really no way. The MIR file formats changed during field test, so all of the MIRs should be removed prior to upgrade from T1.2.4 to anything.