[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
|
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
5467.0. "Access Violation (from a Thread?)" by SUBWAY::YANNIOS () Wed Aug 11 1993 15:47
While running DECmcc in command line mode, the following error ocurrs:
MCC V1.3 access violation occurs:
MCC>
%CMA-F-EXCCOP, exception raised; VMS condition code follows
-SYSTEM-F-ACCVIO, access violation, reason mask=00, virtual address=00000000, PC
=009FF48A, PSL=03C00009
%TRACE-F-TRACEBACK, symbolic stack dump follows
module name routine name line rel PC abs PC
0004B8C4 0004B8C4
0007C782 0007C782
000775DC 000775DC
0007AC78 0007AC78
%SMG-F-INVKBD_ID, invalid keyboard-id
| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 5467.1 | Threads version? | TRKWSH::COMFORT | Here beside the rising tide | Wed Aug 11 1993 18:30 | 11 |
|
Just to check, do have the CMA threads library
SYS$COMMON:[SYSLIB]CMA$OPEN_RTL.EXE
image name: "CMA$OPEN_RTL"
image file identification: "CMA V1.10-030"
Installed from the MCC distribution?
Dave
|
| 5467.2 | we have correct version | SUBWAY::YANNIOS | | Thu Aug 12 1993 00:39 | 11 |
| Yup. this is the correct version.
This happened on a window running MCC command line mode. In this
window, we had over 50 alarm rules active and polling various areas
of the network. We suspect that it occurred when one of the systems
that was being polled for X.25 Circuit information ran out of
process control slots because there were many NML processes
running.
/nick
|