[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference azur::mcc

Title:	DECmcc user notes file. Does not replace IPMT.
Notice:	Use IPMT for problems. Newsletter location in note 6187
Moderator:	TAEC::BEROUD

Created:	Mon Aug 21 1989
Last Modified:	Wed Jun 04 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	6497
Total number of notes:	27359

2117.0. "ELM with director only ?" by LARVAE::AITKINS_T () Wed Jan 15 1992 13:36

    A quick question I hope. Can you run the DECmcc director with the
    DECmcc ELM V1.0 to give basic management of or FDDI kit i.e. sets and
    shows, or is the BMS required also. The reason I ask is the ELM is described
    as having an enhanced bridge access module, therfore do you need the
    bridge access module supplied in the BMS before you can use the ELM.
    
    			Thanks Terry.

T.R	Title	User	Personal Name	Date	Lines
2117.1	ELM will run on the director	QUIVER::HAROKOPUS		`Wed Jan 15 1992 16:29`	8
	Yes you can install/run ELM on the director without BMS. You will need the following license PAKS: DECMCC-ELM-AM-V DECMCC-ELM-FM-V Bob
2117.2		QUIVER::CHILDS	Ed Childs	`Fri Jan 17 1992 12:49`	6
	\| ...DECmcc ELM V1.0 to give basic management of or FDDI kit i.e. sets and \| shows... The ELM V1.0 kit includes a Bridge AM and a Concentrator AM. The FDDI AM was not written at the time. If you want to do sets and shows on the fiber lines of a DECbridge 500/600 or DECconcentrator 500 then yes.