| Title: | DECmcc user notes file. Does not replace IPMT. |
| Notice: | Use IPMT for problems. Newsletter location in note 6187 |
| Moderator: | TAEC::BEROUD |
| Created: | Mon Aug 21 1989 |
| Last Modified: | Wed Jun 04 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 6497 |
| Total number of notes: | 27359 |
My current DECmcc EMS/BMS VAXstation 3100 Mod 30 configuration (VMS V5.3)
has the following software installed:
DECmcc EMS V1.0
DECmcc BMS V1.0 (SSB) (DECmcc DECnet Diagnostic and SNMP modules)
UCX V1.2
DNS V1.1
DECelms V1.0
DEC SoftPC V1.X
We are planning to migrate to a VAXstation 3100 Mod76 with the
following configuration:
(2) RZ24 disk drives
(2) RZ57 disk drives
(1) TZ30 tape drive
(1) RX23 floppy drive
32MB memory
SPX 8-plane Sony Trinitron 19" Color Monitor
1) Since VMS V5.4 is required, is anyone reporting any problems with
running the above software on VMS V5.4? What about running the DECmcc
BMS V1.1 EFT software on VMS V5.4?
2) For ease of system management, I would like to keep ALL of the
DECmcc BMS files on the RZ57 system disk. However, by keeping all MCC
files on the system disk, will I experience any SIGNIFICANT I/O performance
degradation, especially in later releases involving the HISTORIAN, etc?
Please advise.
\Thanks in Advance
Please advise.
\Thanks in Advance
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 455.1 | note 454 was the only one I saw | GOSTE::CALLANDER | Mon Nov 26 1990 12:29 | 9 | |
So far, but I am still catching up on the notes I missed while out
ill, I have only seen one note recently that was specific to 5.4.
That is note 454, and the problems were when setting display from
one decwindows system to another. My understanding is that the fix
for that was being worked for the EFT release due out momentarily.
jill
| |||||