| Title: | Forum on OPEN DECconnect |
| Moderator: | NETCAD::DIMINICO |
| Created: | Wed Aug 21 1991 |
| Last Modified: | Tue Jun 03 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 171 |
| Total number of notes: | 508 |
I have a customer who is looking to displace an old DECserver 550 with modem control, using DECserver 900TM units. WHat they need to accomplish this is an adapter that will move the modem control signals from the 36 pin adapter (used with the DECserver 550) to the appropriate spots on the DECserver 900GM 68 pin connector. Is there an OPEN DECconnect giblet that does this? Is there a clean solution? Dennis Faust NSIS Philadelphia DTN 328-3352
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 169.1 | NOTED::tunsrv2-tunnel.imc.das.dec.com::dfaust | Dennis Faust | Fri Apr 18 1997 10:43 | 4 | |
To clarify (since I had a brain cramp), I will be using DECserver 900GM units, to be able to mass connect the lines. Dennis Faust | |||||
| 169.2 | Modem control | NETCAD::LEARSON | Tue Apr 22 1997 13:12 | 8 | |
Dennis, i thought that even though i talked to you on the phone i'm going to give the answer here to close the loop. There are two different cables tha will connect Modems to the DECserver 900GM depending on how much control you need. The BN41A has the 68 pin connector wired to 4 25 pin D connectors. This cable has full modem control (RS232). The BN41D has the 68 pin connector to 8 25 pin D connectors and only has 4 wire modem controll. Hope this helps Jack | |||||