| Title: | SABLE SYSTEM PUBLIC DISCUSSION |
| Moderator: | COSMIC::PETERSON |
| Created: | Mon Jan 11 1993 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 2614 |
| Total number of notes: | 10244 |
I am trying to install NT V4.0 on a AS2100 4/200. I have applied
firmware update from the FW CD V3.8. ECU V1.8 for NT. However NT
installation is unable to determine the type of CPU and give a
series of processor type to choose. Unfortunately none seem to be
the AS2100 4/200.
If I were to install V3.51 it also reports that it is unable to
determine the CPU type, however in this case there is an option for the
AS2100 4/200. By choosing it I am able to install V3.51 succesfully. What
could be the problem here? It is the NVRAM/arc/hal bug. Is this fixed
in the V3.8 CD.
The system was one that was formerly running OpenVMS, with 4
processors, 1GB memory.
Justin
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 2585.1 | DECWET::LEESC | Fri Apr 25 1997 16:08 | 15 | ||
If you are running ARC V4.50 or above, then this is expected. As part of the fix for the NVRAM problem, we change the platform id name that was passed to NT. As a result, setup will not recognize the machine when you attempt to install NT. When you install NT V4.0, make sure you have the HAL kit with you as you will need it. When setup pops up a message saying that it does not recognize your machine, choose Others and put the floppy that has the HAL kit into the floppy drive. Press Enter and setup will load the HAL from the floppy. FYI... the HAL kit is available on the web at http://www.windows.digital.com/support/sysoft.asp. Scott | |||||
| 2585.2 | New HAL Kit works | ZPOVC::JUSTIN | Sat Apr 26 1997 13:08 | 2 | |
Thanks Scott, that was the problem. With the HAL kit all is fine.
| |||||