[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference humane::scheduler

Title:	SCHEDULER
Notice:	Welcome to the Scheduler Conference on node HUMANEril
Moderator:	RUMOR::FALEK

Created:	Sat Mar 20 1993
Last Modified:	Tue Jun 03 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	1240
Total number of notes:	5017

1176.0. "what is the agent doing??" by MUNICH::REIN (How come holes in swiss chesse??) Wed Oct 30 1996 10:27

    Hallo there,
    
    I ave installed a vms agent on my workstation now and want to have run
    a job from the server, but the only thing I get is the status of
    211190244.
    
    Scheduler Job #67 (Name: LOGO2) Completed on Remote Node PASING
    MUNAXP::REIN>Remote job status: 211190244
    
    Is it right, that the agent is only a small portion of the scheduler,
    which makes it possible to run a job on a remote system.
    
    Are there any special commands available for the agent?
    
    Or can I do the same things when I would install  the full scheduler
    on my station?
    
    It makes me confusing, that I can't find special userguide for
    scheduler agents.
    
    regards
    
    Volker

T.R Title User Personal
Name Date Lines

1176.1 ... CSC32::WATERS The Agony of Delete Mon Nov 04 1996 20:06 17

T.R	Title	User	Personal Name	Date	Lines
1176.1	...	CSC32::WATERS	The Agony of Delete	`Mon Nov 04 1996 20:06`	17
	That error is "error running job". What results do you get when you issue the following from the server node: $ SCHED SHOW STATUS/REMOTE=agent_node The agent software can run a command or command file you specify in a job created on the server node. There isn't a scheduler command interface on a agent. You can only check that the two scheduler can talk to each other using the above sched show status command. Check to see that the logical "NSCHED$REMOTE_SUPPORT_ENABLED is defined to "TRUE". If not define it /SYSTEM/EXEC and restart scheduler. Mark Waters CSC Colorado

    
     That error is "error running job".
    
     What results do you get when you issue the following from the server
    node:
    $ SCHED SHOW STATUS/REMOTE=agent_node
    	
    The agent software can run a command or command file you specify in a job
    created on the server node. There isn't a scheduler command interface
    on a agent. You can only check that the two scheduler can talk to
    each other using the above sched show status command.
    
    Check to see that the logical "NSCHED$REMOTE_SUPPORT_ENABLED is defined
    to "TRUE". If not define it /SYSTEM/EXEC and restart scheduler.
    
     Mark Waters
     CSC Colorado