Conference humane::scheduler

1094.0. "Jobs stuck in QUEUED state V2.1B-9" by CSC32::WATERS (The Agony of Delete) Mon May 13 1996 17:13

    
    
     We are currently seeing a problem at one customer site where 
    jobs are going into a queued state and not running. At times there
    has been 10-15 jobs in a queued state. This seems to happend
    three-four times a week.
    
     Scheduler version 2.1B-9 on 5 VAX nodes, no Alpha's no remote
    agents.
    
    EMJVX2 V2.1B-9  29-APR-1996 06:46:22    2   100     5    4   8188 <--Default  
    EMJVX1 V2.1B-9  29-APR-1996 06:46:07    3   100     5    4   4596
    EMJVX0 V2.1B-9   5-MAY-1996 11:10:45    0   100     5    4   5020
    EMJVX3 V2.1B-9   5-MAY-1996 11:23:19    0   100     5    4  11549
    EMJVX4 V2.1B-9   7-MAY-1996 14:24:12    1   100     5    4   7601
    
    o There is nothing in the Vermont_creamery.log file to show that
      the job was queued. You can see the previous run of the job, 
      queued, started, finished.
    o There is no entry left in the queue, all queue's are init'ed
      with /RETAIN=ERROR.
    o There is nothing in the accountng file, so the job did try to
      run and then aborted.
    o 
    
     Below, I have included some of the logfile from one of the nodes.
    There are alot of delete_qentry entries in this file. Any idea
    what they are ?
     
    I tried to find a good output of a job in the queued state, but the
    dailin log is trashed. Here is on of the jobs that was stuck at on time
    but not in this output.
    
    Job Name             Entry    User_name    State      Next Run Time
    --------             -----    ---------    -----      -------------
    WIN_ROSI_UPD_465     3830     1OPERATOR    Scheduled   3-JUN-1996 22:00
    VMS_Command : @SCH:UBS ITA WIN_BRN_ROSI_UPD
    Group : ROSI_UPD                           Type : MONTHEND
    Comment : WIN_465_ROSI_U2-APR-1996 06:00      Last Exit Status :UNKNOWN 
    Schedule Interval : M 22:00                Mode   : Batch
    Mail to           : @SCH:INV.DIS (on ERROR)  
    Days              : (MON,TUE,WED,THU,FRI)               
    Output File       : WIN$LOG:WIN_ROSI_UPD_465.LOG
    Cluster_CPU       : <Ignored>              Notify user upon
    completion
    Submit Queue      : WIN$PRT0
    CPULimit (x100ms) : 0                      QPriority : 100
    Max_Time Warning  : None                   Job Always retained  
    Stall Notify      : None                   No Retry on Error
    Success Count     : 0                      Failure Count : 7
    Owner UIC         : [400,0]                Restart on Crash
    Read Identifier   : SCH$READ                        
    Pre Function  : @SCH:PRE2 WIN 00465 INV ROSI_UPD RPT, Last Exit Status
    : SUCCESS
    Post Function : @SCH:OP, Last Exit Status : UNKNOWN 
    No local jobs depend upon this job.
    All dependencies must successfully complete after: 12-APR-199606:00:28.75
    Job Dependencies: ([WIN_END_OF_BATCH])
    
    
    
     We have check process quota's, scheduler started under SYSTEM,
    
    EMJVX0_field_>type EMJVX2.log<CR>
    $   VERIFY  = F$VERIFY(0)           ! Set NOVERIFY and save current state  
    Nsched Version V2.1B-9  starting...
    Setting Debugging OFF
    Setting Job Max to  100 
    Setting Logging to  5 
    Setting Default Job Priority to  4 
    Setting Load Balancing ON
    Setting Restart Params to CLEAR on job completition
    Setting Remote Jobs ENABLED 
    Setting brkthru/notify wait to  300  seconds
    %DCL-I-SUPERSEDE, previous value of NSCHED$MAILBOX has been superseded
    %DCL-I-SUPERSEDE, previous value of NSCHED$TERM_MAILBOX has been superseded
    CPUtype= 23  CPU_count= 4  Total pages= 3727846   Meg= 1908   VUPS= 132
    had to open fresh log file....
    Check Requested
    Default was GAINED
    Current log file name: NSCHED$:VERMONT_CREAMERY.LOG
    Renaming to: NSCHED$:VERMONT_CREAMERY.OLD
    Closing log file.
    ... spawning SCHED_SUMMARIZE_LOG.EXE...
    Return status  ==>  1  for spawning Process # 1082354416
    Calling vss$get_history to summarize success records.....done,status=1
    Calling get_history to summarize failure records.....done, status=1
    delete_qentry: entry= 1007442  q=WIN$PAY0
    delete_qentry: entry= 1007454  q=WIN$PAY3
    %MAIL-E-OPENIN, error opening DSA45:[USER.WIN.CLIENT.UBS.SCH]PEJPER.DIS; 
    as input
    -RMS-E-FNF, file not found
    sys$dequeue returned bad status: 2544
    delete_qentry: entry= 1007463  q=WIN$PAY4
    %MAIL-E-OPENIN, error opening DSA45:[USER.WIN.CLIENT.UBS.SCH]PEJPER.DIS; 
    as input
    -RMS-E-FNF, file not found
    sys$dequeue returned bad status: 2544
    delete_qentry: entry= 1007471  q=WIN$PAY2
    %MAIL-E-OPENIN, error opening DSA45:[USER.WIN.CLIENT.UBS.SCH]PEJPER.DIS; 
    as input
    ...
    delete_qentry: entry= 6151  q=WIN$SLS3<CR>
    delete_qentry: entry= 6159  q=WIN$SLS4<CR>
    delete_qentry: entry= 6162  q=WIN$SLS2<CR>
    delete_qentry: entry= 6167  q=WIN$SLS0<CR>
    Error creating space for command interpreter symbol table<CR>
    Process quota exceeded<CR>
    sys$dequeue returned bad status: 2544<CR>
    Error creating space for command interpreter symbol table<CR>
    Process quota exceeded<CR>
    Error creating space for command interpreter symbol table<CR>
    Process quota exceeded<CR>
    delete_qentry: entry= 6168  q=WIN$SLS2<CR>
    delete_qentry: entry= 6174  q=WIN$SLS4<CR>
    delete_qentry: entry= 6175  q=WIN$SLS1<CR>
    sys$dequeue returned bad status: 2544<CR>
    Error creating space for command interpreter symbol table<CR>
    Process quota exceeded<CR>
    Error creating space for command interpreter symbol table<CR>
    Process quota exceeded<CR>
    delete_qentry: entry= 6177  q=WIN$SLS2<CR>
    delete_qentry: entry= 6180  q=WIN$SLS1<CR>
    delete_qentry: entry= 6183  q=WIN$SLS0<CR>
    ...

    
    Anyone know what the Delete_qentry are ?

Any news on this subject???

I have the same problem.


Johan Willems.