| Title: | TurboLaser Notesfile - AlphaServer 8200 and 8400 systems |
| Notice: | Welcome to WONDER::TURBOLASER in it's new home shortly |
| Moderator: | LANDO::DROBNER |
| Created: | Tue Dec 20 1994 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 1218 |
| Total number of notes: | 4645 |
The QRL listings for the 8400 system shows the part
number for the 512mb memory module as a MS7CC-DA.
I have seen various versions of this module when
doing a >>>show config.
I have seen a MS7CC-DQ,MS7CC-DP,MS7CC-DF. What is
the significance of the -DP,DQ,DF? Are all these different
suffixes compatable?
Thx,
Jim Gaines Colorado CSC
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 1122.1 | Specific vendors | BIRDIE::IVANY | Tue Mar 04 1997 12:09 | 11 | |
Jim,
I beleive that the generic part number for the memory is MS7CC-DA
indicating 512mb while -DQ, -DP, -DF, etc. actually specifies the DRAM
vendor used.
There are various opinions regarding mixed vendors DRAMS on memories but
generally you should not mix vendors on SIMMs and not mix SIMMs on mother
boards. (other opinions on this are available)
Wayne
| |||||