[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | TurboLaser Notesfile - AlphaServer 8200 and 8400 systems |
| Notice: | Welcome to WONDER::TURBOLASER in it's new home shortly |
| Moderator: | LANDO::DROBNER |
|
| Created: | Tue Dec 20 1994 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 1218 |
| Total number of notes: | 4645 |
1101.0. "TLZ07 with SCSI CAM error (TurboLaser with DU3.2D2" by MDR01::CARRANZ (MCS Madrid) Tue Feb 11 1997 07:41
Hello,
Is there anybody who could help me interpreting next SCSI CAM error:
We have these errors from time to time, when they do "cpios/tar/dump" and
# file /dev/rmt0h ---> doesn't answer
# cd /dev; ./MAKEDEV tz? ----> Special files are created, but they
don't answer.
You can't use anymore the tape, the only way is "reboot" the computer.
We have changed TLZ07 several times and the connector SCSI cable, without any
solution.
I'll post this notes into turbo conference.
Any help will be appreciated
Thanks very much,
Carmen Arranz.
******************************* ENTRY 163 ********************************
Logging OS 2. Digital UNIX
System Architecture 2. Alpha
Event sequence number 4.
Timestamp of occurrence 31-JAN-1997 05:39:28
Host name unieos
System type register x0000000C AlphaServer 8x00
Number of CPUs (mpnum) x00000004
CPU logging event (mperr) x00000008
Event validity 1. O/S claims event is valid
Event severity 1. Severe Priority
Entry type 199. CAM SCSI Event Type
------- Unit Info -------
Bus Number 3.
Unit Number x00E8 Target = 5.
LUN = 0.
------- CAM Data -------
Class x22 DEC SIM - SCSI Interface Module
Subsystem x22 DEC SIM - SCSI Interface Module
Number of Packets 2.
------ Packet Type ------ 258. Module Name String
Routine Name ss_abort_done
------ Packet Type ------ 256. Generic String
SCSI abort has been performed
******************************** ENTRY 164 ********************************
Logging OS 2. Digital UNIX
System Architecture 2. Alpha
Event sequence number 3.
Timestamp of occurrence 31-JAN-1997 05:39:28
Host name unieos
System type register x0000000C AlphaServer 8x00
Number of CPUs (mpnum) x00000004
CPU logging event (mperr) x00000008
Event validity 1. O/S claims event is valid
Event severity 1. Severe Priority
Entry type 199. CAM SCSI Event Type
------- Unit Info -------
Bus Number 3.
Unit Number x00E8 Target = 5.
LUN = 0.
------- CAM Data -------------- CAM Data -------
Class x22 DEC SIM - SCSI Interface Module
Subsystem x22 DEC SIM - SCSI Interface Module
Number of Packets 2.
------ Packet Type ------ 258. Module Name String
Routine Name ss_abort_done
------ Packet Type ------ 256. Generic String
SCSI abort has been performed
******************************** ENTRY 165 ********************************
******************************** ENTRY 166 ********************************
Logging OS 2. Digital UNIX
System Architecture 2. Alpha
Event sequence number 1.
Timestamp of occurrence 15-JAN-1997 19:55:12
Host name unieos
System type register x0000000C AlphaServer 8x00
Number of CPUs (mpnum) x00000001
CPU logging event (mperr) x00000008
Event validity 1. O/S claims event is valid
Event severity 5. Low Priority
Entry type 300. Start-Up ASCII Message Type
SWI Minor class 9. ASCII Message
SWI Minor sub class 3. Startup
ASCII Message
Alpha boot: available memory from 0x10f4000 to 0x1ffbe000
Digital UNIX V3.2D-2 (Rev. 41.64); Mon Jan 13 08:45:27 GMT+0100 1997
physical memory = 512.00 megabytes.
available memory = 494.84 megabytes.
using 1957 buffers containing 15.28 megabytes of memory
Firmware revision: 0.0
PALcode: VMS version 0.00
AlphaServer 8200 Model 5/300
Master cpu at slot 8.
Created FRU table configuration errorlog packet
tiop0 at tlsb0 node 8
tiop0: cpu interrupt mask being set as 100.
pci0 at tiop0 slot 0
isp0 at pci0 slot 0
isp0: QLOGIC ISP1020 - Differential Mode
isp0: Firmware revision 2.10 (loaded by console)
isp0: StorageWorks signal reporting not enabled
scsi0 at isp0 slot 0
isp1 at pci0 slot 1
isp1: QLOGIC ISP1020 - Differential Mode
isp1: Firmware revision 2.10 (loaded by console)
isp1: StorageWorks signal reporting not enabled
scsi4 at isp1 slot 0
tu0: DECchip 21040-AA: Revision: 2.4
tu0 at pci0 slot 2
tu0: DEC TULIP Ethernet Interface, hardware address: 00-00-F8-21-D2-99
tu0: console mode: selecting UTP (10BaseT) port: no link
isp2 at pci0 slot 4
isp2: QLOGIC ISP1020 - Differential Mode
isp2: Firmware revision 2.10 (loaded by console)
isp2: StorageWorks signal reporting not enabled
scsi2 at isp2 slot 0
isp3 at pci0 slot 5
isp3: QLOGIC ISP1020
isp3: Firmware revision 2.10 (loaded by console)
isp3: StorageWorks signal reporting not enabled
scsi3 at isp3 slot 0
rz24 at scsi3 bus 3 target 0 lun 0 (DEC RZ28M (C) DEC 0568)
rz25 at scsi3 bus 3 target 1 lun 0 (DEC RZ28M (C) DEC 0568)
rz28 at scsi3 bus 3 target 4 lun 0 (DEC RRD43 (C) DEC 1084)
tz29 at scsi3 bus 3 target 5 lun 0 (DEC TLZ07 (C)DEC 4BQE)
tu1: DECchip 21040-AA: Revision: 2.4
tu1 at pci0 slot 6
tu1: DEC TULIP Ethernet Interface, hardware address: 00-00-F8-22-24-5F
tu1: console mode: selecting UTP (10BaseT) port: no link
pci1 at tiop0 slot 1
tu2: DECchip 21040-AA: Revision: 2.3
tu2 at pci1 slot 7
tu2: DEC TULIP Ethernet Interface, hardware address: 00-00-F8-20-15-AB
tu2: auto sensing: selected AUI (10Base2|5) port
pza0 at pci1 slot 11
pza0 firmware version: DEC N01 A10
scsi1 at pza0 slot 0
rz12 at scsi1 bus 1 target 4 lun 0 (DEC HSZ40 V25Z)
rz12 at scsi1 bus 1 target 4 lun 1 (DEC HSZ40 V25Z)
rz12 at scsi1 bus 1 target 4 lun 2 (DEC HSZ40 V25Z)
rz14 at scsi1 bus 1 target 6 lun 0 (DEC HSZ40 V25Z)
rz14 at scsi1 bus 1 target 6 lun 1 (DEC HSZ40 V25Z)
rz14 at scsi1 bus 1 target 6 lun 2 (DEC HSZ40 V25Z)
rz14 at scsi1 bus 1 target 6 lun 3 (DEC HSZ40 V25Z)
rz14 at scsi1 bus 1 target 6 lun 6 (DEC HSZ40 V25Z)
TLMEM at node 6
Dual TLEP at node 5
Dual TLEP at node 4
lvm0: configured.
lvm1: configured.
dli: configured
SuperLAT. Copyright 1993 Meridian Technology Corp. All rights reserved.
| T.R | Title | User | Personal
Name | Date | Lines
|
|---|