Conference napalm::musclecars

    I have complete rebuild kits for Pontiac 3 X 2 carbs..1 set early 421
    1 set late 421 and 1 set 66-389..each set contains parts (gaskets etc.)
    for all three carbs..Free to anyone who can use them..
    
    contact me at DESERT::WOYAK
    
    Jim

    I've had a 389 sitting in my garage since 1979 waiting for the original
    in my 64 Bonne wagon to die.  A year later the left frame rail had to
    be replaced from front to back wheels ($400 at Central Welding in
    Waltham, Mass).  Three years later the right rear control arm brackets
    rotted away ($150 at Billerica Frame).  In 1984, after ignoring pleading 
    cries to look under the rocker cover, the dry push rod punched a hole
    in the rocker arm and caused the retainers to drop the valve into the
    cylinder.  Lesson:  Don't try to get 200K miles without removing the
    rocker cover at least once, certainly not when loud clacking tells you
    something is amiss.  Also don't stop the engine in spite of the racket
    as long as it's running, get it home.  Why didn't I use the long saved 
    spare into it.  Well, because after 20 years of NE salt the body needed
    extensive plastic surgery.  Will I sell the 389?  Probably not.  Why? 
    Same reason I won't sell my 1953 illuminated Chief Pontiac hood
    ornament.

    
    
    	'60 389 Bare Block without caps. Cheap. Or it goes to the scrapper.
    
    
    	$50.00 OBO
    
    	Dave

A friend of mine has come across a bone yard in northern NH with several early 
1950's era Pontiacs in it. One is a convertible I believe.

If any one is interested, contact me off line and I'll tell you how to get in
touch with him.

For the rest of the week, BUFFER::WAITE, after that (508) 887-8925.

    
    
    	Pontiac RAIII Heads - #12's - From '70 GTO
    
    	Ported and valves swirled by Jim Butler personally
    
    	7/16 studs
    
        Competition double springs
    
    	Decked on 3 sides
    
    
    	$1250.00/offer                                   

    
     Front fenders and hood for '78 Firebird. They are basically okay, but 
    have a few 1/8 inch drill holes in 'em, no rust. Make an offer. Can be
    reached at node above or 719-596-3818 during the day. Parts are in Colo
    Sprgs.
    
    Tony
    

    
    
    	I have a whole load of '67 to '69 Firebird parts.  Too much to
    	list.  I picked up the load from another guy who parted out a
    	few 'birds.
    
    	Let me know if you're looking for anything!
    
    
    	Hammer

    Hi,
    
    i have some old Pontiac Motor material that i'd love to move out of
    my garage;
    
    - (1) 70' 428, 2-bolt main engine block.
    - Rods, Crank & pistons from above block.
    - Other misc. engine parts from the above block
    - (1) set of 69' RA-III 048 Heads, no cracks with valves intact.
    - (1) set of 69' RA-III Exhaust Manifolds for a Firebird.
    
    If you have interest drop me a note (CARROL::YOUNG) and we can discuss 
    the $$$....
    
    Thanks,
    
    		Doug

    Hi there Dave:
    
      Just wondering if you still have those heads for sale or are they 
    long gone,if not just reply and i will get ahold of you.
      I have 1972 455 H.O out of G.T.O that would love to see those heads.
      
    
                                       KEN

    
    	For sale - All Pontiac parts
    
    Stock 4bbl intake for V-8  $25
    3 sets of 400 heads (various)  $40 set
    Edelbrock Torquer II intake (2500-6500 rpm range)  $80
    
    Send mail to NOKNOK::HIGGINS
    Home phone Maynard,MA 508-897-8754
    
    Mark Higgins