| The MONO output probably sums the 2 stereo outs if there is nothing
in the second jack. By inserting the plug you may have fooled the
machine into sending two descrete signals out each of the jacks.
Since you only had a single audio out running you weren't hearing
the full stereo sound.
I'm not sure the resistor (or one of *any* value) had any bearing
on the sound, but if you got a musically usefull effect an nothing
caused smoke, go for it...
Edd
|
| Actually, I sorta happened on something mysterious like that that has
never been explained to me.
As a kid, I had a real cheap 12 watt guitar amp. I had to use a
distortion box to get any distortion or gain out of it, and even
way back then I HATED distortion boxes. In those days, they called
them "fuzz boxes", a term which seems to have died somewhat.
I called them "buzz boxes" that's what they sounded like to me.
Anyway, I also had this ANCIENT "Revere" reel-to-reel tape deck
with a builtin amp and speaker. It had a PA mode. I made the
experiment of plugging my guitar into it without much success.
It wasn't loud enough, and the tone wasn't very interesting.
Then one day, I tried it again. It was loud and gave me a really
great sound. Not a "buzz" or a "fuzz", but what we now call
"Overdrive".
I managed to figure out that the reason it sounded different that day
was because I didn't plug the plug ALL the way into the tape deck.
It was sorta half out. Doing that is what caused it to sound that way
and I used it for years as my guitar amp.
At the risk of "waxing superlative", it really had a great sound that
I wish I had today (it has since died and parts are unavailable).
My question is, why did pulling the plug somewhat out cause the
gain to go up like that?
db
|
| I have one of those tape decks (still works). The phone jack input
is a sterio one, where there are multiple gains, depending on the
length of the 1/4 phone plug (strange stuff). These were made for
use in schools & were practically indestructable. I'll vouch for
the tone - an overdriven tube amp, into a saturated transformer
core just has a certain sound that works well for a guitar sound.
I used to do the same thing back in the late 1960's with my 3M
(Revere) tape deck.
Jens
|