[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference irocz::terminal_servers

Title:	Terminal Servers
Notice:	See Note 2 for Directory of important notes. Please use keywords.
Moderator:	LAVC::CAHILLON

Created:	Tue May 14 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	3547
Total number of notes:	12300

3436.0. "Can't connect from NCP to ds90tl" by FORAT::PONS () Tue Feb 11 1997 06:31

	Hello,

	A customer with two VX3100 M38 OpenVMS 5.52-h4, try to connect from
	NCP> to DS90TL, in a system with the ethernet controller SVA-0 works
	OK, but from the other system with ethernet controller ISA-0 not,
	data set hang-up.

	In a system that connect correctly the customer have installed the 
	TSM 1.6a and the other have TSM 1.6.

	Is a TSM version the problem????
	In a SPD for TSM 1.6 DS90TL is supported

	Is possible that the problem was the ethernet controller.

	Thanks in advance,

	Jordi 
	MCS BARCELONA

T.R Title User Personal
Name Date Lines

3436.1 LAVC::CAHILL Jim Cahill Tue Feb 11 1997 17:29 9

T.R	Title	User	Personal Name	Date	Lines
3436.1		LAVC::CAHILL	Jim Cahill	`Tue Feb 11 1997 17:29`	9
	> A customer with two VX3100 M38 OpenVMS 5.52-h4, try to connect from > NCP> to DS90TL, in a system with the ethernet controller SVA-0 works > OK, but from the other system with ethernet controller ISA-0 not, > data set hang-up. Jordi, you might get a better response in a DECnet or VMS notes conference. NCP is a VMS utility. Jim

> A customer with two VX3100 M38 OpenVMS 5.52-h4, try to connect from
> NCP> to DS90TL, in a system with the ethernet controller SVA-0 works
> OK, but from the other system with ethernet controller ISA-0 not,
> data set hang-up.

Jordi, you might get a better response in a DECnet or VMS notes conference.
NCP is a VMS utility.

Jim