[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference irocz::terminal_servers

Title:Terminal Servers
Notice:See Note 2 for Directory of important notes. Please use keywords.
Moderator:LAVC::CAHILLON
Created:Tue May 14 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:3547
Total number of notes:12300

3507.0. "Question about STOP BITS in DECserver 90M" by TBJVOA::OHTANI (NPB-Japan Market Support) Wed Apr 23 1997 14:26

Hello, please advise about stop bits in DECserver 90M.

   My customer uses a number of DECserver 90M as OpenVMS LAT 
   devices(LTAxxxxx), connecting their devices in DECservers.

   Though he sets stop bit "1" in static (by 'change' command), 
   sometimes "2" might be set automatically in ports dynamically.

   By DNAS V2.0 user guides, STOP BITS characteristic is changed dynamically 
   into "2" in case to set a port 'STOP BITS' "Dynamic" and case of port's 
   speed 134 bps.

   What case is STOP BITS changed automatically except below?
   Customer's question is whether it is bug or spec.


Environment:
  DNAS Version V2.0

  Port spec.
        Character size  : 8             Input Speed     : 4800
        Flow Control    : None          Output Speed    : 4800
        Parity          : Odd           Signal Control  : Disable
	Stop bits:	: 1

        Access          : Remote        Local Switch    : None
        Backward switch : None          Name            : PORT_1
        Break           : Disable       Session Limit   : 4
        Forward Switch  : None          Type            : Ansi
        Default Protocol: LAT           Default menu    : None

                Preferred Service : None
                Authorized Group  : 0
                (Current)  Group  : 0

        Enable characteristic:
        Failover, Look, Message codes, Remote Modification Verification

Thank you,
Shoichi Ohtani, Marketing support, NPB-Japan.
T.RTitleUserPersonal
Name		DateLines