| Title: | Terminal Servers |
| Notice: | See Note 2 for Directory of important notes. Please use keywords. |
| Moderator: | LAVC::CAHILL ON |
| Created: | Tue May 14 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 3547 |
| Total number of notes: | 12300 |
Hello!!
My customer has a problem with static ARP entries.
Problem
=======
My customer wants to 4 entries for static ARP.
I seem a maximum for 4 ARP entries in DS700's help.
-------------------------------------------------------------------------
DS700's help
DEFINE/SET/CHANGE INTERNET ARP
Enters an internet ARP entry into the ARP database. Maximum: 4 ARP entries.
^^^^^^^^^^^^^^
{DEFINE} INTERNET ARP ENTRY inet-addr ETHERNET eth-addr [NOPURGE]
{SET }
{CHANGE}
inet-addr internet address of the internet ARP entry.
eth-addr Ethernet address of the internet ARP entry.
NOPURGE the entry will not be purged.
-------------------------------------------------------------------------
I would like to know this problem to bug.
If not bug, I would like to know solved method.
Following log is several commands to display.
Local>show server
Network Access SW V2.0 for DS700-08 BL10C-40 ROM V6.3-0 Uptime: 0 00:16:22
Address: 00-00-F8-51-98-FE Name: SVTUNNEL Number: 0
Identification:
Circuit Timer: 80 Password Limit: 3
Console Port: 8 Prompt: Local>
Inactivity Timer: 30 Queue Limit: 100
Keepalive Timer: 20 Retransmit Limit: 8
Multicast Timer: 30 Session Limit: 64
Node Limit: 200 Software: WWENG2
Service Groups: 0
Enabled Characteristics:
Broadcast, Dump, Lock
Local> show memory
Dynamic RAM: 4 M bytes
Non-Volatile RAM: 32 K bytes
Flash RAM:
Installed: Yes
Total size: 2 M bytes
Boot block: Valid
Load Image:
Name: WWENG2
Size: 1570844 bytes
Version: Network Access SW V2.0 BL10C-40
Local> show server stat
Network Access SW V2.0 for DS700-08 BL10C-40 ROM V6.3-0 Uptime: 0 00:16:34
Address: 00-00-F8-51-98-FE Name: SVTUNNEL Number: 0
Cur High Max
Active Ports: 2 2 8 Minutes To Shutdown: N/A
Active Users: 2 2 8 Discarded Nodes: 0
Queue Entries: 0 0 100 Resource Errors: 0
Available Services: 0 0 N/A Port Framing Errors: 0
Local Services: 0 0 0 Port Parity Errors: 0
Reachable Nodes: 0 0 200 Port Overrun Errors: 0
Boot Device: Flash RAM: 0
Active Circuits: 0 0 32 Primary Hosts:
Connected Nodes: 0 0 32 Load Address:
Connected Sessions: 1 1 64 Dump Address: None Available
% CPU Used: 7 85 100 Console User: None Available
% Memory Used: 31 31 100 Boot Protocol:
Selftest Status: Normal
Software Status: Normal
Local> show server chara
Network Access SW V2.0 for DS700-08 BL10C-40 ROM V6.3-0 Uptime: 0 00:16:39
Address: 00-00-F8-51-98-FE Name: SVTUNNEL Number: 0
Identification:
Circuit Timer: 80 Password Limit: 3
Console Port: 8 Prompt: Local>
Inactivity Timer: 30 Queue Limit: 100
Keepalive Timer: 20 Retransmit Limit: 8
Multicast Timer: 30 Session Limit: 64
Node Limit: 200 Software: WWENG2
Service Groups: 0
Enabled Characteristics:
Broadcast, Dump, Lock
Local> show inter arp entry
Internet Address Ethernet Address Status
160.251.17.1 08-00-2B-E5-16-86 No Purge
160.251.17.2 08-00-2B-E5-11-FB No Purge
160.251.17.241 08-00-2B-B7-3F-DA No Purge
Local> change inter arp entry 160.251.51.10 ether 08-00-2b-e5-86-80
Local -357- ARP entry limit reached
Local>
Local>
Local>
Local>
Local> show inter arp entry
Internet Address Ethernet Address Status
160.251.17.1 08-00-2B-E5-16-86 No Purge
160.251.17.2 08-00-2B-E5-11-FB No Purge
160.251.17.241 08-00-2B-B7-3F-DA No Purge
Please teach me.
Thanks in advanced.
net/sps/mcs/DEC-J
/norimichi hakuta
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 3492.1 | Please, everyone for reply!! | EWBV06::HAKUTA | a network engineer SPS/MCS/JPN | Wed Apr 09 1997 05:09 | 10 |
Please teach me, everyone.
Any ideas or suggestions?
Please teach me.
Thanks in advanced.
net/sps/mcs/DEC-J
/norimichi hakuta
| |||||
| 3492.2 | NPSS::SAHR | Wed Apr 09 1997 21:11 | 11 | ||
The ARP (Address Resolution Protocol) has the permanent database in NVRAM and the working database in RAM. When you use the SHOW command you display what is in the RAM. Using the LIST command displays what is in the permanent DB. The CHANGE command changes the NVRAM and RAM database. The SET command changes only the RAM. Try using LIST INTERNET ARP ENTRY to display what you have in the NVRAM area. There maybe more entries in the list then you see with the SHOW command. Gene | |||||
| 3492.3 | LIST INTER ARP ENT to display!! | EWBV06::HAKUTA | a network engineer SPS/MCS/JPN | Fri Apr 11 1997 08:01 | 29 |
Hi Gene, thanks for reply.
I'm try a LIST INTERNET ARP ENTRY to display.
To result, Display of LIST INTERNET ARP ENTRY is just like
display of SHOW INTERNET ARP ENTRY.
My customer wants to 4 entries for static ARP.
Any ideas or suggestions?
Following log is list inter arp entry to display.
Local>
Local> list inter arp entry
Internet Address Ethernet Address Status
160.251.17.1 08-00-2B-E5-16-86 No Purge
160.251.17.2 08-00-2B-E5-11-FB No Purge
160.251.17.241 08-00-2B-B7-3F-DA No Purge
Local>
Please teach me.
Thanks in advanced.
net/sps/mcs/DEC-J
/norimichi hakuta
| |||||
| 3492.4 | Correct image to use for four arp entries in NVRAM | NPSS::SAHR | Fri Apr 18 1997 18:39 | 17 | |
Hello Norimichi, A corrected field test image for the problem of 4 entries in the ARP NVRAM database, is available. The image can be found at NPSS::PUBLIC$DSK:[INTERCHANGE]WWENG2_FT10E02.SYS;1 This will allow for 4 entries in the database. A Set command allows for more than four entries in RAM. Please let me know how this image works for you. Regards, Gene | |||||
| 3492.5 | fine work!! | EWBV06::HAKUTA | a network engineer SPS/MCS/JPN | Wed May 14 1997 16:34 | 14 |
Hello Gene.
Thanks for support.
This problem is fixed at customer site.
Thanks
Regards
net/sps/mcs/DEC-J
/norimichi hakuta
| |||||