[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | Digital Brouters Conference |
| Notice: | New common-code brouter family: RouteAbout, DECswitch 900 |
| Moderator: | MARVIN::HART LL |
|
| Created: | Mon Jul 17 1995 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 929 |
| Total number of notes: | 3736 |
Hi There ,
I know that this issue was discussed in note number 734. We here in Australia
have most ISPs using Ascend MAX4000 to accept connection from remote sites
using CHAP ( not PAP ) acroos ISDN.
I have attached the config of the 90EI and the EVENT LOG as well. I'll be very
greatfull if someone can point out the problem here.
In the Event LOG I see : PPP.026 : lcp req rslt: Configure Reject, opt 0, In
4,
nt 3 int PPP/1.........
The customer has turned off CHAP in the LCP options and put in the CHAP
IDs/PSSW
as shown in the configuration.
This info was given to the customer from Ascend :
Address Range : 203.61.81.1 thru 203.61.81.7
Netmask : 255.255.255.248
Login ID : ia043380
Password : hsi41d
Router ID : ia043380
Router ISDN interface : 203.61.81.1
Remote Chap Username : aonead1
Remote Chap Password : hsi41d
Local Chap Username : ia043380
Local Chap Password : hsi41d .
It is connecting to Ascend MAX4000 ( IP addr 203.12.181.137 ).
We really need to know how can we succesfully communicate with Ascend MAX4000.
Here are the CONFIG & EVENT LOG :
Here is the configuration
===================
Config>list config
RtAbt Acces EI/MP, Brouter: 1 Enet 1T1 1BRI,HW=1,RO=1,#7188,SW=V2.0-1
Hostname: ia043380
Maximum packet size: [autoconfigured]
Maximum number of global buffers: [autoconfigured]
Number of Restarts before a Reload/Dump: 64
Logging disposition: detached
Console baudrate: 9600 (Autobaud)
Console inactivity timer (minutes): 0
Physical console login: enabled
Modem control: disabled
Contact person for this node: Greg Bell
Location of this node: Cyber Melbourne
Configurable Protocols:
Num Name Protocol
0 IP DOD-IP
3 ARP Address Resolution
4 DN DNA Phase IV
7 IPX NetWare IPX
8 OSI ISO CLNP/ESIS/ISIS
9 DVM Distance Vector Multicast Routing Protocol
10 BGP Border Gateway Protocol
11 SNMP Simple Network Management Protocol
12 OSPF Open SPF-Based Routing Protocol
14 APL AppleTalk
20 SDLC SDLC/HDLC-Relay
22 AP2 AppleTalk Phase 2
23 ASRT Adaptive Source Routing Transparent Enhanced Bridge
24 HST TCP/IP Host Services
26 DLS Data Link Switching
27 PIM Protocol Independent Multicast
Configurable Features:
Num Name Feature
0 WRS WAN Restoral
1 BRS Bandwidth Reservation
2 MCF MAC Filtering
4 X25S X25 Switching
Config>prot ip
Internet protocol user configuration
IP config>list all
Interface addresses
IP addresses for each interface:
intf 0 203.61.81.1 255.255.255.224 Network broadcast,
fill 1
intf 1 IP disabled on this
interface
intf 2 IP disabled on this
interface
intf 3 192.168.97.42 255.255.255.252 Network broadcast,
fill 1
Router-ID: 203.61.81.1
Routing
route to 0.0.0.0,0.0.0.0 via 192.168.97.41, cost 1
Protocols
BOOTP forwarding: disabled
Directed broadcasts: enabled
ARP Subnet routing: disabled
RFC925 routing: disabled
OSPF: enabled
Per-packet-multipath: disabled
RIP: enabled
RIP default origination: disabled
Per-interface address flags:
intf 0 203.61.81.1 Send no routes
intf 1 IP & RIP are disabled on this interface
intf 2 IP & RIP are disabled on this interface
intf 3 192.168.97.42 Send net and subnet routes
Per-interface Triggered Rip values :
Accept RIP updates always for:
[NONE]
EGP: disabled
IP config>ex
Config>net 2
ISDN user configuration
ISDN Config>list all
ISDN Configuration
Local Network Address Name = 0392359500
Local Network Address = 0392359500
Local Network Subaddress =
Maximum frame size in bytes = 2048
Outbound call address Timeout = 180 Retries = 2
Switch Variant = Australia TS013.1
DN0 (Directory Number 0) = 0392359500
DN1 (Directory Number 1) =
TEI = Automatic
PS1 detect = Enabled
No circuit address accounting information being kept
ISDN Config>ex
Config>list isdn
Address assigned name Network Address Network Subaddress
--------------------- --------------- ------------------
0882032845 0882032845
0392359500 0392359500
Config>net 3
Circuit configuration
Circuit Config>list all
Base net: 2
Destination name: 0882032845
Inbound dst name: * ANY *
Outbound calls allowed
Inbound calls allowed
Idle timer = 0 (fixed circuit)
SelfTest Delay Timer = 150 ms
Send Line ID: NO
Circuit Config>enc
Point-to-Point user configuration
PPP Config>list all
LCP Parameters
--------------
Config Request Tries: 20 Config Nak Tries:
10
Terminate Tries: 10 Retry Timer:
3000
LCP Options
-----------
Max Receive Unit: 1500 Magic Number:
Yes
Authentication Protocol: None
PAP Parameters
--------------
Authent Request Tries: 20
Retry Timer: 3000
Request Timer: 15000
PAP Ids/Passwords
-----------------
Local ID: ia043380
Local Password: hsi4ld
Remote ID: ia043380
Remote Password: hsi4ld
CHAP Parameters
--------------
Authent Request Tries: 20
Retry Timer: 3000
Request Timer: 15000
Repeat Authentication Timer: 0
CHAP Ids/Passwords
-----------------
Local ID: ia043380
Local Password: hsi4ld
Remote ID: (None)
Remote Password: (None)
NCP Parameters
---------------
Config Request Tries: 20 Config Nak Tries:
10
Terminate Tries: 10 Retry Timer:
3000
IPCP Options
------------
IPCP Compression: None
IP Address: Don't Send or Request
CCP Options
-----------
Data Compression disabled
Algorithm: Stac-LZS
Stac: histories 1
Stac: check_mode SEQ
PPP Config>
Here is the event log
===============
4 Networks:
Net Interface MAC/Data-Link Hardware
State
0 Eth/0 Ethernet/IEEE 802.3 SCC Ethernet Up
1 PPP/0 Point to Point SCC Serial Line
Disabled
2 ISDN/0 ISDN Base Net ISDN Basic Rate Up
3 PPP/1 Point to Point ISDN Basic Rate
Testing
+
*t 2
ISDN.003: ConnID 0x0 Status msg cause (0x5:0x10) NLS Cause Indication on
nt 2 in
t ISDN/0
ISDN.033: Chn 0 ConnID 0x0 FSM st Call_Init ev DiscInd -> Idle nt 2 int
ISDN/0
ISDN.032: Chn 0 ConnID 0x0 Cll Txcmp on nt 2 int ISDN/0
ISDN.015: Chn 0 FSM st Idle ev ConnReq -> Call_Init nt 2 int ISDN/0
ISDN.033: Chn 0 ConnID 0x0 FSM st Call_Init ev ConnCnf -> DataXfer nt 2
int ISDN
/0
PPP.014: LCP/Listen fsm_down nt 3 int PPP/1
PPP.002: Srl prt up, nt 3 int PPP/1
PPP.014: LCP/Listen fsm_start nt 3 int PPP/1
PPP.019: LCP/Listen lcp_starting nt 3 int PPP/1
PPP.014: LCP/Listen fsm_reset nt 3 int PPP/1
PPP.019: LCP/Listen lcp_reset nt 3 int PPP/1
PPP.014: LCP/Listen fsm_timer nt 3 int PPP/1
PPP.019: LCP/Listen lcp_makereq nt 3 int PPP/1
PPP.019: LCP/Listen lcp_makeoptions nt 3 int PPP/1
PPP.038: mk mag 0x001A8A3B
PPP.016: LCP/Listen snd Configure Request, id 0 len 10, nt 3 int PPP/1
PPP.014: LCP/Req Sent fsm_timeout nt 3 int PPP/1
PPP.014: LCP/Req Sent fsm_timer nt 3 int PPP/1
PPP.019: LCP/Req Sent lcp_makereq nt 3 int PPP/1
PPP.019: LCP/Req Sent lcp_makeoptions nt 3 int PPP/1
PPP.038: mk mag 0x001A8A3B
PPP.016: LCP/Req Sent snd Configure Request, id 1 len 10, nt 3 int
PPP/1
ISDN.021: Chn 1 ConnID 0x0 RxD Pkt ln 30 nt 2 int ISDN/0
PPP.017: LCP/Req Sent rcv Configure Request, id 1 len 26, nt 3 int
PPP/1
PPP.019: LCP/Req Sent lcp_request nt 3 int PPP/1
PPP.052: ck lcp unk 0
PPP.026: lcp req rslt: Configure Reject, opt 0, ln 4, nt 3 int PPP/1
PPP.043: mk lcp unk 0
PPP.046: ck aut 0xC223
PPP.095: aut rej; no lcl id/pwd nt 3 int PPP/1
PPP.026: lcp req rslt: Configure Nak, opt 3, ln 5, nt 3 int PPP/1
PPP.125: ck mrru 1500
PPP.026: lcp req rslt: Configure Reject, opt 17, ln 4, nt 3 int PPP/1
PPP.123: mk mrru 1500
PPP.126: ck epdiscr cl 3 00C07B5436EE
PPP.026: lcp req rslt: Configure Reject, opt 19, ln 9, nt 3 int PPP/1
PPP.124: mk epdiscr cl 3 00C07B5436EE
PPP.016: LCP/Req Sent snd Configure Reject, id 1 len 21, nt 3 int PPP/1
ISDN.021: Chn 1 ConnID 0x0 RxD Pkt ln 14 nt 2 int ISDN/0
PPP.017: LCP/Req Sent rcv Configure Ack, id 1 len 10, nt 3 int PPP/1
PPP.019: LCP/Req Sent lcp_ack nt 3 int PPP/1
PPP.019: LCP/Req Sent lcp_makereq nt 3 int PPP/1
PPP.019: LCP/Req Sent lcp_makeoptions nt 3 int PPP/1
PPP.038: mk mag 0x001A8A3B
ISDN.021: Chn 1 ConnID 0x0 RxD Pkt ln 13 nt 2 int ISDN/0
PPP.017: LCP/Ack Rcvd rcv Configure Request, id 2 len 9, nt 3 int PPP/1
PPP.019: LCP/Ack Rcvd lcp_request nt 3 int PPP/1
PPP.046: ck aut 0xC223
PPP.095: aut rej; no lcl id/pwd nt 3 int PPP/1
PPP.026: lcp req rslt: Configure Nak, opt 3, ln 5, nt 3 int PPP/1
PPP.037: mk aut 0xC223
PPP.016: LCP/Ack Rcvd snd Configure Nak, id 2 len 9, nt 3 int PPP/1
PPP.014: LCP/Ack Rcvd fsm_timer nt 3 int PPP/1
ISDN.021: Chn 1 ConnID 0x0 RxD Pkt ln 13 nt 2 int ISDN/0
PPP.017: LCP/Ack Rcvd rcv Configure Request, id 3 len 9, nt 3 int PPP/1
PPP.019: LCP/Ack Rcvd lcp_request nt 3 int PPP/1
PPP.046: ck aut 0xC223
PPP.095: aut rej; no lcl id/pwd nt 3 int PPP/1
PPP.026: lcp req rslt: Configure Nak, opt 3, ln 5, nt 3 int PPP/1
PPP.037: mk aut 0xC223
PPP.016: LCP/Ack Rcvd snd Configure Nak, id 3 len 9, nt 3 int PPP/1
PPP.014: LCP/Ack Rcvd fsm_timer nt 3 int PPP/1
ISDN.021: Chn 1 ConnID 0x0 RxD Pkt ln 13 nt 2 int ISDN/0
PPP.017: LCP/Ack Rcvd rcv Configure Request, id 4 len 9, nt 3 int PPP/1
PPP.019: LCP/Ack Rcvd lcp_request nt 3 int PPP/1
PPP.046: ck aut 0xC223
PPP.095: aut rej; no lcl id/pwd nt 3 int PPP/1
PPP.026: lcp req rslt: Configure Nak, opt 3, ln 5, nt 3 int PPP/1
PPP.037: mk aut 0xC223
PPP.016: LCP/Ack Rcvd snd Configure Nak, id 4 len 9, nt 3 int PPP/1
PPP.014: LCP/Ack Rcvd fsm_timer nt 3 int PPP/1
ISDN.021: Chn 1 ConnID 0x0 RxD Pkt ln 13 nt 2 int ISDN/0
PPP.017: LCP/Ack Rcvd rcv Configure Request, id 5 len 9, nt 3 int PPP/1
PPP.019: LCP/Ack Rcvd lcp_request nt 3 int PPP/1
PPP.046: ck aut 0xC223
PPP.095: aut rej; no lcl id/pwd nt 3 int PPP/1
PPP.026: lcp req rslt: Configure Nak, opt 3, ln 5, nt 3 int PPP/1
PPP.037: mk aut 0xC223
PPP.016: LCP/Ack Rcvd snd Configure Nak, id 5 len 9, nt 3 int PPP/1
PPP.014: LCP/Ack Rcvd fsm_timer nt 3 int PPP/1
ISDN.021: Chn 1 ConnID 0x0 RxD Pkt ln 13 nt 2 int ISDN/0
PPP.017: LCP/Ack Rcvd rcv Configure Request, id 6 len 9, nt 3 int PPP/1
PPP.019: LCP/Ack Rcvd lcp_request nt 3 int PPP/1
PPP.046: ck aut 0xC223
PPP.095: aut rej; no lcl id/pwd nt 3 int PPP/1
PPP.026: lcp req rslt: Configure Nak, opt 3, ln 5, nt 3 int PPP/1
PPP.037: mk aut 0xC223
PPP.016: LCP/Ack Rcvd snd Configure Nak, id 6 len 9, nt 3 int PPP/1
PPP.014: LCP/Ack Rcvd fsm_timer nt 3 int PPP/1
ISDN.021: Chn 1 ConnID 0x0 RxD Pkt ln 13 nt 2 int ISDN/0
PPP.017: LCP/Ack Rcvd rcv Configure Request, id 7 len 9, nt 3 int PPP/1
PPP.019: LCP/Ack Rcvd lcp_request nt 3 int PPP/1
PPP.046: ck aut 0xC223
PPP.095: aut rej; no lcl id/pwd nt 3 int PPP/1
PPP.026: lcp req rslt: Configure Nak, opt 3, ln 5, nt 3 int PPP/1
PPP.037: mk aut 0xC223
PPP.016: LCP/Ack Rcvd snd Configure Nak, id 7 len 9, nt 3 int PPP/1
PPP.014: LCP/Ack Rcvd fsm_timer nt 3 int PPP/1
ISDN.021: Chn 1 ConnID 0x0 RxD Pkt ln 13 nt 2 int ISDN/0
PPP.017: LCP/Ack Rcvd rcv Configure Request, id 8 len 9, nt 3 int PPP/1
PPP.019: LCP/Ack Rcvd lcp_request nt 3 int PPP/1
PPP.046: ck aut 0xC223
PPP.095: aut rej; no lcl id/pwd nt 3 int PPP/1
PPP.026: lcp req rslt: Configure Nak, opt 3, ln 5, nt 3 int PPP/1
PPP.037: mk aut 0xC223
PPP.016: LCP/Ack Rcvd snd Configure Nak, id 8 len 9, nt 3 int PPP/1
PPP.014: LCP/Ack Rcvd fsm_timer nt 3 int PPP/1
ISDN.021: Chn 1 ConnID 0x0 RxD Pkt ln 13 nt 2 int ISDN/0
PPP.017: LCP/Ack Rcvd rcv Configure Request, id 9 len 9, nt 3 int PPP/1
PPP.019: LCP/Ack Rcvd lcp_request nt 3 int PPP/1
PPP.046: ck aut 0xC223
PPP.095: aut rej; no lcl id/pwd nt 3 int PPP/1
PPP.026: lcp req rslt: Configure Nak, opt 3, ln 5, nt 3 int PPP/1
PPP.037: mk aut 0xC223
PPP.016: LCP/Ack Rcvd snd Configure Nak, id 9 len 9, nt 3 int PPP/1
PPP.014: LCP/Ack Rcvd fsm_timer nt 3 int PPP/1
ISDN.021: Chn 1 ConnID 0x0 RxD Pkt ln 8 nt 2 int ISDN/0
PPP.017: LCP/Ack Rcvd rcv Terminate Request, id 10 len 4, nt 3 int
PPP/1
PPP.014: LCP/Req Sent fsm_sendtermack nt 3 int PPP/1
PPP.016: LCP/Req Sent snd Terminate Ack, id 10 len 4, nt 3 int PPP/1
ISDN.021: Chn 1 ConnID 0x0 RxD Pkt ln 8 nt 2 int ISDN/0
PPP.017: LCP/Req Sent rcv Terminate Request, id 11 len 4, nt 3 int
PPP/1
PPP.014: LCP/Req Sent fsm_sendtermack nt 3 int PPP/1
PPP.016: LCP/Req Sent snd Terminate Ack, id 11 len 4, nt 3 int PPP/1
ISDN.003: ConnID 0x0 Status msg cause (0x5:0x10) NLS Cause Indication on
nt 2 in
t ISDN/0
ISDN.033: Chn 1 ConnID 0x0 FSM st DataXfer ev DiscInd -> Idle nt 2 int
ISDN/0
PPP.014: LCP/Req Sent fsm_timeout nt 3 int PPP/1
PPP.014: LCP/Req Sent fsm_timer nt 3 int PPP/1
PPP.019: LCP/Req Sent lcp_makereq nt 3 int PPP/1
PPP.019: LCP/Req Sent lcp_makeoptions nt 3 int PPP/1
PPP.038: mk mag 0x001A8A3B
PPP.016: LCP/Req Sent snd Configure Request, id 2 len 10, nt 3 int
PPP/1
PPP.014: LCP/Req Sent fsm_timeout nt 3 int PPP/1
PPP.014: LCP/Req Sent fsm_timer nt 3 int PPP/1
PPP.019: LCP/Req Sent lcp_makereq nt 3 int PPP/1
PPP.019: LCP/Req Sent lcp_makeoptions nt 3 int PPP/1
PPP.038: mk mag 0x001A8A3B
PPP.016: LCP/Req Sent snd Configure Request, id 3 len 10, nt 3 int
PPP/1
PPP.014: LCP/Req Sent fsm_timeout nt 3 int PPP/1
PPP.014: LCP/Req Sent fsm_timer nt 3 int PPP/1
PPP.019: LCP/Req Sent lcp_makereq nt 3 int PPP/1
PPP.019: LCP/Req Sent lcp_makeoptions nt 3 int PPP/1
PPP.038: mk mag 0x001A8A3B
PPP.016: LCP/Req Sent snd Configure Request, id 4 len 10, nt 3 int
PPP/1
PPP.014: LCP/Req Sent fsm_timeout nt 3 int PPP/1
PPP.014: LCP/Req Sent fsm_timer nt 3 int PPP/1
PPP.019: LCP/Req Sent lcp_makereq nt 3 int PPP/1
PPP.019: LCP/Req Sent lcp_makeoptions nt 3 int PPP/1
PPP.038: mk mag 0x001A8A3B
PPP.016: LCP/Req Sent snd Configure Request, id 5 len 10, nt 3 int
PPP/1
PPP.014: LCP/Req Sent fsm_timeout nt 3 int PPP/1
PPP.014: LCP/Req Sent fsm_timer nt 3 int PPP/1
PPP.019: LCP/Req Sent lcp_makereq nt 3 int PPP/1
PPP.019: LCP/Req Sent lcp_makeoptions nt 3 int PPP/1
PPP.038: mk mag 0x001A8A3B
PPP.016: LCP/Req Sent snd Configure Request, id 6 len 10, nt 3 int
PPP/1
PPP.014: LCP/Req Sent fsm_timeout nt 3 int PPP/1
PPP.014: LCP/Req Sent fsm_timer nt 3 int PPP/1
PPP.019: LCP/Req Sent lcp_makereq nt 3 int PPP/1
PPP.019: LCP/Req Sent lcp_makeoptions nt 3 int PPP/1
PPP.038: mk mag 0x001A8A3B
PPP.016: LCP/Req Sent snd Configure Request, id 7 len 10, nt 3 int
PPP/1
PPP.014: LCP/Req Sent fsm_timeout nt 3 int PPP/1
PPP.014: LCP/Req Sent fsm_timer nt 3 int PPP/1
PPP.019: LCP/Req Sent lcp_makereq nt 3 int PPP/1
PPP.019: LCP/Req Sent lcp_makeoptions nt 3 int PPP/1
PPP.038: mk mag 0x001A8A3B
PPP.016: LCP/Req Sent snd Configure Request, id 8 len 10, nt 3 int
PPP/1
PPP.014: LCP/Req Sent fsm_timeout nt 3 int PPP/1
PPP.014: LCP/Req Sent fsm_timer nt 3 int PPP/1
PPP.019: LCP/Req Sent lcp_makereq nt 3 int PPP/1
PPP.019: LCP/Req Sent lcp_makeoptions nt 3 int PPP/1
PPP.038: mk mag 0x001A8A3B
PPP.016: LCP/Req Sent snd Configure Request, id 9 len 10, nt 3 int
PPP/1
PPP.014: LCP/Req Sent fsm_timeout nt 3 int PPP/1
PPP.014: LCP/Req Sent fsm_timer nt 3 int PPP/1
PPP.019: LCP/Req Sent lcp_makereq nt 3 int PPP/1
PPP.019: LCP/Req Sent lcp_makeoptions nt 3 int PPP/1
PPP.038: mk mag 0x001A8A3B
PPP.016: LCP/Req Sent snd Configure Request, id 10 len 10, nt 3 int
PPP/1
Many Thanks in Advance.
Youda Kopel ,
NPB Aust.
[Posted by WWW Notes gateway]
| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 853.1 | CHAP remote ID/password required | MARVIN::TURNER | Neil Turner IPEG REO, 830-4140 | Mon Apr 14 1997 06:58 | 44 |
| You appear to have configured Local/Remote ID/Passwords for PAP but
only a Local ID/Password for CHAP. You must configure a Remote
ID/Password for CHAP otherwise the RouteAbout will reject requests to use
CHAP from the remote end. (You do not need the ID'd/Passwords for PAP
if you are not using it).
PPP Config>set auth remote chap
CHAP Remote ID[]: id
CHAP Remote Password []: password
PPP Config>
PAP Parameters
--------------
Authent Request Tries: 20
Retry Timer: 3000
Request Timer: 15000
PAP Ids/Passwords
-----------------
Local ID: ia043380 \
Local Password: hsi4ld |
| You don't need these for CHAP
Remote ID: ia043380 |
Remote Password: hsi4ld /
CHAP Parameters
--------------
Authent Request Tries: 20
Retry Timer: 3000
Request Timer: 15000
Repeat Authentication Timer: 0
CHAP Ids/Passwords
-----------------
Local ID: ia043380
Local Password: hsi4ld
Remote ID: (None) <--------\ You need these
Remote Password: (None) <--------/
Neil
|
| 853.2 | Many Thanks | MIPSBX::"KopelYouda@mail.dec.com" | Youda Kopel | Mon Apr 14 1997 23:28 | 16 |
| Dear Neil ,
Many Thanks for your help......Make SENSE to configure the REMOTE CHAP as
well.
It would be nice to have a document that point out what is required in
configuring the 90EI for PAP/CHAP Authentication with Ascend MAX4000, over
ISDN. .
Cheers ,
Youda Kopel ,
NPB / Melb.
[Posted by WWW Notes gateway]
|
| 853.3 | Fixed in next release ... | KEEF::PETERS | | Tue Apr 15 1997 08:59 | 13 |
| > It would be nice to have a document that point out what is required in
> configuring the 90EI for PAP/CHAP Authentication with Ascend MAX4000,
> over ISDN. .
Agreed. I have seen this issue raised twice before (see notes 793.3
and 734.9 for my responses). The next issue of the manuals should be
clearer on how to configure PAP/CHAP Authentication, but I don't expect
to go into specifics such as 90EI, Ascend MAX4000 etc. The principles
should be common.
Cheers
Steve Peters
|