| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 831.1 | | IROCZ::GUNNER | | Thu Apr 03 1997 12:29 | 12 |
| > which mibs are supported in VN familly in V1.5 ?
> furthermore i try to see the traffic on ethernet,fddi,FE or ATM
> on Vns using Router Manager interface utilisation windows if
> the "Ifspeed" seems correct , i can't show any traffic (always =0)
Unfortunately, the current VNswitch hardware is not able to
accumulate byte counters for traffic. This means that the router
manager utilization will always show as zero. The system does
support packet counters so you can tell if there is any traffic -
you just can't tell how much of an interface is being utilized.
Chris
|
| 831.2 | | NETCAD::FLOWERS | High Performance Networking; Dan | Thu Apr 03 1997 13:07 | 6 |
| > which mibs are supported in VN familly in V1.5 ?
Also, the release notes contain a complete list of the MIBS supported by that
version of the firmware.
Dan
|
| 831.3 | useful to have them | PRSSOS::PEYRACHE | Jean-Yves Peyrache Country Support Group France | Fri Apr 04 1997 05:14 | 6 |
| thanks for your comments
will you want to add theses counters in future versions
or is really hardware dependent ?
JYP
|
| 831.4 | | IROCZ::GUNNER | | Fri Apr 04 1997 12:21 | 7 |
| > will you want to add theses counters in future versions
> or is really hardware dependent ?
They really require hardware support - we do have plans for
a modified Ethernet daughter card that will support byte counters.
Chris
|
| 831.5 | Traffic Display ? | PRSSOS::PEYRACHE | Jean-Yves Peyrache Country Support Group France | Fri Apr 04 1997 15:48 | 7 |
|
Bad news,
just for my personal mind , how can customers see traffic
on VNs ports now , without plugging an analyseur or Rmon Probe
JYP
|
| 831.6 | allo allo | PRSSOS::PEYRACHE | Jean-Yves Peyrache Country Support Group France | Thu Apr 10 1997 11:52 | 4 |
|
Any responses from eng team ??
JYP
|
| 831.7 | | NETCAD::FLOWERS | High Performance Networking; Dan | Thu Apr 10 1997 11:59 | 7 |
| > just for my personal mind , how can customers see traffic
> on VNs ports now , without plugging an analyseur or Rmon Probe
What do you mean by "see traffic"? See the actual packets and their contents?
Or see the traffic utilization of a port?
Dan
|
| 831.8 | percent | PADNOM::PEYRACHE | Jean-Yves Peyrache Country Support Group France | Fri Apr 11 1997 08:39 | 6 |
| >>What do you mean by "see traffic"? See the actual packets and their contents?
>>Or see the traffic utilization of a port?
see the utilization of a port % of charge on ports
JYP
|