| Title: | Digital Brouters Conference |
| Notice: | New common-code brouter family: RouteAbout, DECswitch 900 |
| Moderator: | MARVIN::HART LL |
| Created: | Mon Jul 17 1995 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 929 |
| Total number of notes: | 3736 |
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 285.1 | BANDWITH ON DEMAND | GNOMO::JOSEF | Jose Fernandez. ACT Spain | Mon Feb 26 1996 13:11 | 9 |
| 285.2 | Being developed now... | EDWIN::BONARDI | Mon Feb 26 1996 21:45 | 4 | |
| 285.3 | Thanks | GNOMO::JOSEF | Jose Fernandez. ACT Spain | Tue Feb 27 1996 05:56 | 1 |
| 285.4 | ISDN Basics ? | 29419::M_SHELDON | Tue Mar 18 1997 12:12 | 21 | |
Hi: I admit an almost complete lack of knowledge of ISDN, but really need help in answering the following questions related to how the ISDN line should be configured to support a connection to a RouteAbout Access EI. 1) Does the line need 2 "B" channels ? 2) Does the equipment require 2 directory numbers for each "B" channel ? 3) Does the equipment require both voice and data capabilities ? Any help in answering these questions is greatly appreciated. Mike Sheldon CSC/CS Network Support | |||||
| 285.5 | You can't multiplex 2 "B" channels... | NETCAD::BATTERSBY | Tue Mar 18 1997 13:08 | 11 | |
>> 1) Does the line need 2 "B" channels ?
If what you are asking is whether the option exists to multiplex
the two B channels to create a single 128kbps channel, I believe
this is not supported. So two B channels are required.
I'm not sure of the answers to the other questions. Others can
probably answer those.
Bob
| |||||
| 285.6 | MARVIN::CLEVELAND | Wed Mar 19 1997 08:28 | 22 | ||
>1) Does the line need 2 "B" channels ?
If the question is, will it work with the 1B+D services offered in some
areas, the answer is a qualified yes. We haven't tested it on a line
like this, but it should work.
If the question is can I use the other B channel for a phone/fax/etc
the answer is yes; proper configuration is required to avoid clashes!
>2) Does the equipment require 2 directory numbers for each "B" channel ?
No. On switches that use directory numbers, you need only program in 1
directory number (a second is optional). That number is not tied in
any way to a B channel, though! If a call comes in to the number you
have set in the RouteAbout, it will accept it regardless of the B
channel.
>3) Does the equipment require both voice and data capabilities ?
No, it is data only.
| |||||
| 285.7 | Thanks | 29419::M_SHELDON | Wed Mar 19 1997 11:46 | 0 | |