Conference turris::digital_unix

9129.0. "Doconfig and s3trio error under 3.2G" by NETRIX::"emilio.sorrentino@itawww.mln.dec.com" (sorrentino@trn.mts.dec.com) Wed Mar 12 1997 07:20

	Customer with AlphaServer 1000 5/300 with 3.2G DigitalUnix have a            
    problem running  "doconfig" after remove all *VOX* subsets from 3.2G.
	
	Problem was about "pty_data.c" like in note 2420.
	So I' ve removed "options SL" , "options RPTY" but didn't 
	fix problem; it was changed !!.

	Doconfig now stops with an other error, about s3trio.

	Also tryed to start with genvmunix , but nothing change...

	Any suggestion are apreciated ,

				Thanks in advance,
					Emilio
	
	Follows same informations :

	AlphaServer 1000 5/300 DigitalUnix 3.2G
	SRM Console V. 4.6 - 221
	Arc Console 5.23 
	
	Video PCI Card ATI Technologies

 After reboot genvmunix and performed sizer -n ,then moved /tmp/newsysname in
 /sys/conf/newsysname:




# doconfig -c FANGIO

*** KERNEL CONFIGURATION AND BUILD PROCEDURE ***

Saving /sys/conf/FANGIO as /sys/conf/FANGIO.bck

Do you want to edit the configuration file? (y/n) [n]: n


*** PERFORMING KERNEL BUILD ***
min. free vnode limit too small; 150 assumed
maximum vnode limit too small; 10000 assumed
        Working....Thu Mar  6 16:34:07 MET 1997

*** WARNING ***
An error has occurred during system configuration.  A partial listing
of the error log file (./errs) follows:

s3trio_init_screen
s3trio_clear_screen
s3trio_scroll_screen
s3trio_blitc
s3trio_map_unmap_screen
s3trio_close
s3trio_probe
s3trio_attach
s3trio_save
s3trio_restore
s3trio_init
s3trio_adjust
s3trio_print
s3trio_interrupt
s3trio_bot
*** Exit 1 (ignored)
chmod 755 a.out
chmod: a.out: No such file or directory
*** Exit 4
Stop.
** NOTE ***
The customized kernel for this machine could not be successfully
created.  One possible problem could be kernel layered products
that might be incompatible with the base operating system.  This
script will now automatically attempt to build a kernel using the
base operating system only.
Is this ok? (y/n) [y]:

*** Retrying Kernel Build ***
min. free vnode limit too small; 150 assumed
maximum vnode limit too small; 10000 assumed
        Working....Thu Mar  6 16:37:37 MET 1997

*** WARNING ***
An error has occurred during system configuration.  A partial listing
of the error log file (./errs) follows:

s3trio_init_screen
s3trio_clear_screen
s3trio_scroll_screen
s3trio_blitc
s3trio_map_unmap_screen
s3trio_close
s3trio_probe
s3trio_attach
s3trio_save
s3trio_restore
s3trio_init
s3trio_adjust
s3trio_print
s3trio_interrupt
s3trio_bot
*** Exit 1 (ignored)
chmod 755 a.out
chmod: a.out: No such file or directory
*** Exit 4
Stop.
Press <RETURN> to continue:

Do you want to edit the configuration file? (y/n) [n]:

*** NOTE ***
A new kernel for this machine could not be successfully created.

Restoring original configuration file - /sys/conf/FANGIO
#
#
#  
#
#
#
# more FANGIO
ident           "FANGIO"

#
# Dependency options (DO NOT CHANGE)
#
options         GENERIC
options         UERF
options         MACH
options         OSF
options         ULT_BIN_COMPAT
options         _LMF_
options         BIN_COMPAT
options         MACH_IPC_TCACHE
options         MACH_IPC_WWA
options         MACH_IPC_XXXHACK
options         COMPAT_43
options         BUFCACHE_STATS
options         INOCACHE_STATS
options         STAT_TIME
options         VAGUE_STATS
options         INET
options         UIPC
options         DLI
options         NFS
options         SYSV_COFF
options         SYSV_ELF
options         BSD_TTY
options         TRN
options         TIMOD
options         TIRDWR
options         UFS
options         QUOTA
options         LABELS
options         SL
options         SNMPINFO

#
# Standard options.
#
options         UNIX_LOCKS
options         SER_COMPAT
options         RT_PREEMPT
options         RT_SCHED
options         RT_SCHED_RQ
options         RT_PML
options         RT_TIMER
options         RT_SEM
options         RT_CSEM
options         RT_IPC
#
#
# Makeoptions (DO NOT CHANGE)
#

#makeoptions    ASOPTS="-w"
makeoptions     CDEBUGOPTS="-g3"
makeoptions     CCOMPRESS="-compress"
makeoptions     PROFOPTS="-DPROFILING -DPROFTYPE=4"

#
# Max number of processors in the system (DO NOT CHANGE)
#
processors      16

#
# Special options (see configuring the kernel chapter
# in the Guide to System Administration)
#
timezone        0 dst 0
dfldsiz         134217728
maxdsiz         1073741824
dflssiz         2097152
maxssiz         33554432
cpu             "DEC1000_5"
maxusers        32
machine         alpha

config          vmunix  swap generic

bus             pci0       at nexus?
callout after_c "../bin/mkdata pci"
bus             psiop0     at pci0      slot  6 vector    psiopintr
controller      scsi0      at psiop0    slot  0
device disk     rz0        at scsi0     drive     0
device disk     rz1        at scsi0     drive     8
device disk     rz2        at scsi0     drive     16
device disk     rz4        at scsi0     drive     32
bus             eisa0      at pci0      slot  7
callout after_c "../bin/mkdata eisa"
controller      ace0       at eisa0     slot  9 vector    aceintr
controller      ace1       at eisa0     slot  10 vector    aceintr
controller      lp0        at eisa0     slot  11 vector    lpintr
controller      fdi0       at eisa0     slot  12 vector    fdintr
device disk     fd0        at fdi0      drive     0
controller      vga0       at eisa0     slot  13 vector    vgaintr
controller      gpc0       at eisa0     slot  0 vector    gpcintr
controller      tu0        at pci0      slot  12 vector    tuintr


scs_sysid       1

#
# Pseudodevice Definitions (see configuring the
# kernel chapter in the Guide to System Administration)
#
pseudo-device   ether
pseudo-device   loop
pseudo-device   sysv_hab
pseudo-device   svid_three_hab
pseudo-device   svr_four_hab
pseudo-device   soe_two_hab
pseudo-device   rt_hab
#
# Max number of processors in the system (DO NOT CHANGE)
#
pseudo-device   cpus    16
pseudo-device   ws
# pseudo-device pty     255
#
#


[Posted by WWW Notes gateway]

Pete,
Firstable ,thanks for your interesting,

Peraphs my Email address is not so World-wide visible,
so i try again to use Notes.


Customer never copied files in /usr/sys/BINARY directory ,
but we don't know if VOX Application made by DIALOGIC, and
we don't know if after uninstalled subsets something is 
remained on it.

I checked Mother-board, J27 is DISABLE, GRAPHIC is DISABLE in ECU.


I added line for trio in Config file ,and problem now is changed :

*** WARNING ***
An error has occurred during system configuration.  A partial listing
of the error log file (./errs) follows:

htm_notify_ack
abc_cnopen
abc_cnclose
abc_cnread
abc_cnwrite
abc_cnioctl
abc_cnrint
abc_cnxint
abc_cnstart
abc_cnselect
abc_cnputc
abcprobe
abc_cngetc
abc_cons_init
triodriver
*** Exit 1 (ignored)
chmod 755 a.out
chmod: a.out: No such file or directory
*** Exit 4
Stop.
Press <RETURN> to continue:

*** NOTE ***
The customized kernel for this machine could not be successfully
created.  One possible problem could be kernel layered products
that might be incompatible with the base operating system.  This
script will now automatically attempt to build a kernel using the
base operating system only.
Is this ok? (y/n) [y]: n

					Emilio
[Posted by WWW Notes gateway]

I've tried to find something wrong with your config file,
but as long as you have "vga" and "ws" in there, I'm not
sure how you were getting those undefines.  A "trio" device
would only be needed on a V4.0 system, when the name of
the driver changed, and it wouldn't be required because you
have an ATI card.

I'm not sure what this VOX product may have done or undone.
See if there is anything for /usr/.smdb./*VOX*.scp, those would
be the script files that handeled installation/removal of that
product.

One possible escape sequence is to boot /genvmunix, and then setld
the Digital UNIX distribution for youur version.  This should go
and figure out what, if any, subsets your system is missing and
will call them mandatory.  Afterwards, try running doconfig with
no arguments and see what happens, you should not have to reboot.

good luck,

Paul
[Posted by WWW Notes gateway]