T.R | Title | User | Personal Name | Date | Lines |
---|
2481.1 | | IOSG::CARLIN | Dick Carlin IOSG, Reading, England | Fri Jan 24 1997 13:11 | 36 |
2481.2 | ...and for X.400 O/R Addreses | IOSG::WRENI | | Fri Jan 24 1997 15:24 | 18 |
2481.3 | Not working ... another problem | VAXRIO::63230::abreu | | Fri Jan 24 1997 16:51 | 14 |
| Hi,
I was trying to create the distinguished name but it says that , an error is
shown because there is no superior entries.
I 'm using this :
/C=br/o=embratel/cn=ALL-IN-1_nodename
I tried to use DXIM to create /C=BR/o=embratel but DXIM is not available .
What is missing ?
Thanks .. Marcia
|
2481.4 | | AIMTEC::ZANIEWSKI_D | Taking bids on Andrew's Alphatraz cell | Fri Jan 24 1997 16:54 | 4 |
| Probably X.500 is missing. Did you try DXIM/INTERFACE=CHARACTER
just to be sure?
Dave Zaniewski
|
2481.5 | I tried the right command but ... | VAXRIO::63230::abreu | | Fri Jan 24 1997 17:02 | 14 |
| Hi,
Yes, I tried DXIM/Interface=character_cell.
And X.500 is not missing because I ran again @sys$startup:DXD$DSA_CONFIGURE and after that
I created and enabled the DSA , created the dsa naming context and ran @sys$startup:DUA_CONFIGURE.
If I use ncl , I can see it running.
Any ideas ?
Thanks .. Marcia
|
2481.6 | | IOSG::CARLIN | Dick Carlin IOSG, Reading, England | Mon Jan 27 1997 12:48 | 8 |
|
> I tried to use DXIM to create /C=BR/o=embratel but DXIM is not
> available .
What exactly did you mean by "not available"? Error message? Image not
found?
Dick
|
2481.7 | DXIM is available but I didn't have success with MAE | VAXRIO::63230::abreu | | Mon Jan 27 1997 19:41 | 29 |
| Hi Dick,
The DXIM problem was solved , I reinstalled X.500 and DXIM is
available.
My problem right now is that I can't create the distinguished name
(option: SM MXD MAE) because ALL-IN-1 returns me the following message:
"You must enter a value whose superior entries already exist"
I tried to create the following Distinguished name :
/C=BR/O=EBT/CN=ALL-IN-1_nodename
So, I guessed that maybe I should have to create an entry using DXIM,
then I tried the following :
DXIM> create entry /C=BR/O=EBT attributes objectClass=organization
But DXIM returns me an error:
DSA error: No such entry exists.
Matched the following part of the entry name '/'.
Any ideas .. what can I do to be able to create succesfully the
distinguished name ?
Thanks .. Marcia
|
2481.8 | | IOSG::BILSBOROUGH | SWBFS | Mon Jan 27 1997 22:19 | 14 |
|
Hi,
In NCL do
SHOW DSA NAMING CONTEXT *
If it returns no entries create yourself a naming context.
e.g.
In NCL
CREATE DSA NAMING CONTEXT "/C=GB"
Mike
|
2481.9 | | IOSG::CARLIN | Dick Carlin IOSG, Reading, England | Tue Jan 28 1997 12:56 | 11 |
| Marcia
It might be better to make the naming context /c=br/o=ebt. You can
create the naming context before the named entry exists.
Make sure that you have done all the steps in the DEC X.500 Directory
Service Management Guide sections 2.2 & 2.5 at least (my guide is old
but I assume the headings are roughly the same now, the sections are
"Configuring CN=DSA1" and "Creating Entries ...").
Dick
|
2481.10 | Worked | VAXRIO::ABREU | | Mon Feb 03 1997 20:28 | 7 |
| Hi Dick,
I created the naming context and the configuration worked fine.
Thanks for the help!
Marcia
|