|
Hi
My Customer has connected 4 RSP-2150 Tapes on an Alphaserver 1000A 4/266 and
Digital
Unix V4.0b Rev.564.
If he boot the system , he get's only a short startup entry in the uerf
output.
uerf version 4.2-011 (122)
********************************* ENTRY 1.
*********************************
----- EVENT INFORMATION -----
EVENT CLASS OPERATIONAL EVENT
OS EVENT TYPE 300. SYSTEM STARTUP
SEQUENCE NUMBER 0.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Thu Feb 20 12:08:33 1997
OCCURRED ON SYSTEM wrzx19
SYSTEM ID x0006001B
SYSTYPE x00000000
MESSAGE li: configured
********************************* ENTRY 2.
*********************************
If he disconnect the tapes from the System, the startup entry looks like
normal.
e.g.
********************************* ENTRY 3.
*********************************
----- EVENT INFORMATION -----
EVENT CLASS OPERATIONAL EVENT
OS EVENT TYPE 300. SYSTEM STARTUP
SEQUENCE NUMBER 0.
OPERATING SYSTEM DEC OSF/1
OCCURRED/LOGGED ON Thu Feb 20 12:02:33 1997
OCCURRED ON SYSTEM wrzx19
SYSTEM ID x0006001B
SYSTYPE x00000000
MESSAGE Alpha boot: available memory from
_0x850000 to 0x7fee000
Digital UNIX V4.0B (Rev. 564); Wed
_Feb 19 16:06:10 MET 1997
physical memory = 128.00 megabytes.
available memory = 119.71 megabytes.
using 484 buffers containing 3.78
_megabytes of memory
AlphaServer 1000A 4/266
Firmware revision: 4.7
PALcode: OSF version 1.45
pci0 at nexus
eisa0 at pci0
ace0 at eisa0
ace1 at eisa0
lp0 at eisa0
fdi0 at eisa0
fd0 at fdi0 unit 0
cirrus0 at eisa0
cirrus0: Cirrus Logic CL-GD5428 (SVGA)
_512 Kbytes
pci2000 at pci0 slot 8
isp0 at pci2000 slot 0
isp0: QLOGIC ISP1020A
cam_logger: CAM_ERROR packet
cam_logger: bus 0
isp_probe
NVRAM parameters invalid, using driver
_Fast10 defaults
isp0: Firmware revision 2.10 (loaded
_by console)
scsi0 at isp0 slot 0
rz0 at scsi0 target 0 lun 0 (LID=0)
_(DEC RZ28D (C) DEC 0010)
_(Wide16)
rz4 at scsi0 target 4 lun 0 (LID=1)
_(DEC RRD45 (C) DEC 0436)
psiop0 at pci2000 slot 1
Loading SIOP: script 80a700, reg
_82011000, data 405f2610
scsi1 at psiop0 slot 0
psiop1 at pci2000 slot 2
Loading SIOP: script 816700, reg
_82011100, data 405f2a10
scsi2 at psiop1 slot 0
psiop2 at pci2000 slot 3
Loading SIOP: script 822700, reg
_82011200, data 405f2e10
scsi3 at psiop2 slot 0
psiop3 at pci2000 slot 4
Loading SIOP: script 82e700, reg
_82011300, data 405f3210
scsi4 at psiop3 slot 0
tu0: DECchip 21040-AA: Revision: 2.4
tu0 at pci0 slot 11
tu0: DEC TULIP Ethernet Interface,
_hardware address: 00-00-F8-21-8A-23
tu0: console mode: selecting 10BaseT
_(UTP) port: half duplex: no link
fta0 DEC DEFPA FDDI Module, Hardware
_Revision 0
fta0 at pci0 slot 12
fta0: DMA Available.
fta0: DEC DEFPA (PDQ) FDDI Interface,
_Hardware address: 00-00-F8-60-11-D3
fta0: Firmware rev: 2.46
gpc0 at eisa0
No FRU table entry found in
_console-rpb
--Not creating a FRU table errorlog
_packet
kernel console: cirrus0
dli: configured
==============================================================================
=
scu> sho edt bus 2 target 1 lun 0 full
CAM Equipment Device Table (EDT) Information:
Inquiry Information:
SCSI Bus ID: 2
SCSI Target ID: 1
SCSI Target LUN: 0
Peripheral Device Type: 0x1 (Sequential Access)
Peripheral Qualifier: 0 (Peripheral Device Connected)
Device Type Modifier: 0
Removable Media: Yes
ANSI Version: 1 (Complies to ANSI X3.131-1986, SCSI-1)
ECMA Version: 0
ISO Version: 0
Response Data Format: 0 (SCSI-1)
Additional Length: 51
Vendor Identification: Metrum
Product Identification: RSP-2150
Firmware Revision Level: V05.
The tapes works normal , but the customer wants to know if there is something
to configure in the device database, to see the tape devices in uerf output.
Has anyone experiences with configuring "Metrum RSP-2150" in Digital Unix
V4.0b ???
thanks in advance
/Walter
[Posted by WWW Notes gateway]
|