Conference forty2::mailbus_400

3148.0. "Error initialising RTSE to Zoomit MTA" by IJSAPL::DEWIJK (GJ from the Dutchlands) Fri Mar 07 1997 17:25

Hi,

My customer is trying to connect MB400 to a Zoomit 1984 MTA
the connection is done over RFC1006.

Incoming mail goes well, but outgoing does not.
the OPCOM error is about ' error initialising RTSE'

the only information available until now is an OSAK trace ( see below )

Is there someone recognising this problem?
As I see in the trace below is that there is a problem in data we sent?


Input trace file name : MTA$TRACE:RABO_INIT_332801_549454422.;1
Output trace file name : Q.Q
Trace options selected : Transport SPCI PPCI ACSEPCI Errors
 
 
17:33:28.08 on 6-MAR-1997 : Trace started 
    
    
17:33:28.09 on 6-MAR-1997 : Issued T-CONNECT request 
    
   Calling Transport Selector = "MTA84-AP0791"
   Called Transport Selector = "TSAP"
   Network SAP = '4143314532383042'H
   Transport Options = {tpdu max length = 0, principal class = none, 
      alternative class = none, extended format = no, flow control = 
      no, checksum = no, expedited data = no}
    
    
17:33:49.06 on 6-MAR-1997 : Received T-CONNECT confirmation
    
   Calling Transport Selector = "MTA84-AP0791"
   Called Transport Selector = "TSAP"
   Network SAP = ?
   Transport Options = {tpdu max length = 0, principal class = class0, 
      alternative class = none, extended format = no, flow control = 
      no, checksum = no, expedited data = no}
    
    


17:33:50.01 on 6-MAR-1997 : Issued T-DATA request  [complete]
    
   0D 52 01 27 0A 0E 14 0C 4D 54 41 38 34 2D 41 50 30 37 39 31 0B 0F 
   17 0D 39 37 30 33 30 36 31 36 33 33 32 38 5A 0C 04 14 02 35 37 05 
   06 13 01 00 16 01 01 14 02 02 49 C1 1B 31 19 A0 03 80 01 00 A1 12 
   80 01 0A 81 01 03 82 01 00 84 01 01 A3 04 A0 02 05 00 
    
    
   CN-SPDU =                                                            0D 52
   {
      Connection Identifier =                                           01 27
      {
         Calling SS-user Reference = 14 0C 4D 54 41 38 34 2D 41 5(More) 0A 0E 14
         Common Reference = 17 0D 39 37 30 33 30 36 31 36 33 33 32 38 5A 0B 0F 17
         Additional Reference Info = 14 02 35 37                        0C 04 14
      }
      Connect/Accept Item =                                             05 06
      {
         Protocol Options = { }                                         13 01 00
         Version Number = {version-1}                                   16 01 01
      }
      Session User Requirements = {half-duplex, minor-sync,             14 02 02
         activity-management, exceptions}
      User Data = 31 19 A0 03 80 01 00 A1 12 80 01 0A 81 01 03 82(More) C1 1B 31
       
      CP-type SET =                                                     31 19
      {
         [0] IMPLICIT Mode-selector SET =                               A0 03
         {
            [0] IMPLICIT INTEGER = x410-1984-mode                       80 01 00
         }
         [1] IMPLICIT pUserData SET =                                   A1 12
         {
            checkpointsize [0] IMPLICIT INTEGER = 10                    80 01 0A
            windowsize [1] IMPLICIT INTEGER = 3                         81 01 03
            dialogueMode [2] IMPLICIT INTEGER = monologue               82 01 00
            applicationProtocol [4] IMPLICIT INTEGER = p1               84 01
            [3] ConnectionData CHOICE =                                 A3 04
            {
               open [0] ANY =                                           A0 02
               {
               }
 -- Error: location after TLV does not match length, tag = A0 len = 2
 -- Error: PPDU has not been fully decoded
            }
              
              
17:38:55.04 on 6-MAR-1997 : Received T-DISCONNECT indication
    
    
17:38:55.07 on 6-MAR-1997 : Trace stopped 
    
    

Trace Analyzer finished.
    

    Hi,
    
    we found the problem:
    
    The Zoomit MTA does not support empty values for the mta-name and
    password.
    
    after providing these, the problems we gone.
    
    GJ