[Search for users]
[Overall Top Noters]
[List of all Conferences]
[Download this site]
| Title: | Storage Library System |
|
| Moderator: | COOKIE::REUTER |
|
| Created: | Sun Oct 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 2270 |
| Total number of notes: | 7850 |
2184.0. "Alphasystem , %SYSTEM-VOLINV volume "" , if quickload := 1" by PRSSOS::FONDI () Tue Jan 28 1997 11:02
dear SLS/MDMS Engineering
Last week-end we have upgraded an VAX 7610 runnig VMS 6.2 and SLS 2.8
to an ALPHA 7610.
On this system are connected trough an HSC70 and TC44 two TA90s.
Since the upgrade to Alpha, if cartridge is not inserted in the drive
a restore or an command like
$storage load <device_name> <vol-id> gives the following message
%%%%%%%%%%% OPCOM 25-JAN-1997 13:00:32.36 %%%%%%%%%%%
Request 7, from user SLS on SPLAV3
Assistance required for volume "" on drive _$3$MUA12:
- %SYSTEM-VOLINV, volume is not software enabled
The workaround is to set quickload := 0 in sys$manager:tapestart.com
We have upgraded to SLS 2.8-2-1 with same result.
Question:
---------
When will this be corrected, in the meantime could you post this problem
in the Known Problems and Restrictions for next SLS release if not
included yet or not corrected yet.
(this problem was discover one year ago ,see IPMT CFS.30925 )
thank you,
Henri
---------------------------------------------------------------------------
below is the configuration:
SPLAV3> storage show version
%SLS-I-VERSION, Storage Library System for OpenVMS, version V2.8-2-1
SDA>
System Configuration:
---------------------
System Information:
System Type DEC 7000 Model 710 Primary CPU ID 00
Cycle Time 3.5 nsec (277 MHz) Pagesize 8192 Byte
Memory Configuration:
Cluster PFN Start PFN Count Range (MByte) Usage
#04 0 256 0.0 MB - 2.0 MB Console
#05 256 65280 2.0 MB - 512.0 MB System
Per-CPU Slot Processor Information:
CPU ID 00 CPU State rc,pa,pp,oh,cv,pv,pmv,pl
CPU Type EV45 Pass 2 (21064) Halt PC 00000000 20000000
PAL Code 5.56 Halt PS 00000000 00001F00
CPU Revision C02. Halt Code 00000000 00000000
Serial Number AY52013303 Bootstrap or Powerfail
Console Vers V4.9-18450
Adapter Configuration:
----------------------
TR Adapter Name (Address) Hose Bus Node Device Name HW-Id/SW
-- ---------------------- ---- ----------- ---- ---------------- --------
1 KA0302 (80F5F540) 0 LSB
0 00008006
1 KA0302_MEM 00004000
7 KA0302_MEM 00004000
8 KA0302_IOP 00002000
2 XMI (80F5F900) 0 XMI
1 DEMNA 09040C03
2 CIMNA 08110C2F
3 DEMFA 05210823
8 LAMB 0208102A
3 DEMNA (80F5FE40) 0 GENXMI
EXA: 0 DEMNA 00000C03
4 CIMNA (80F60080) 0 CI
PNA: 0 CIMNA 00000C2F
5 GENXMI (80F603C0) 0 GENXMI
FXA: 0 DEMFA 00000823
I/O data structures
-------------------
DDB list
--------
Address Controller ACP Driver DPT
-------- ---------- ------ -------------------------- --------
80F62D80 SPLAV3$DSA F11XQP SYS$SHDRIVER 8FCF8400
8FCA3A78 OPA OPERATOR 8FCA2400
8FCA3F80 MBA 8FCBDA00
8FCA4658 NLA NLDRIVER 8FCBDBA0
80F616C0 PNA SYS$PNDRIVER 8FCF0000
80FA3340 EXA SYS$EXDRIVER 8FD16E00
80FA9040 FXA SYS$FXDRIVER 8FD19000
80F606C0 PEA SYS$PEDRIVER 8FD1B600
8107C380 FTA SYS$FTDRIVER 8FD25400
810B10C0 WSA SYS$WSDRIVER 8FD25C00
810739C0 NET NETDRIVER 8FD26400
81009E00 NDA NDDRIVER 8FD28E00
8112F700 RTA REMACP SYS$CTDRIVER 8FD29800
8112F9C0 RTB REMACP SYS$RTTDRIVER 8FD2B600
81081240 DFSRR DFSRRDRIVER 8FD2C000
81135380 SPLAV3$DFS DFSCDRIVER 8FD2FE00
81135600 DFSS DFSSDRIVER 8FD36200
81142D80 BG UCX$BGDRIVER 8FD3C600
81142CC0 TNA UCX$TNDRIVER 8FD45000
810A2080 LTA LATACP SYS$LTDRIVER 8FD46600
810AE7C0 SWA PSDCTIMER 8FD4AC00
80E0F140 RDEVA MTAACP RDCDRIVER_A62 8FD72000
80F91440 RDEVB MTAACP RDCDRIVER_A62 8FD72000
80F91A40 RDEVC MTAACP RDCDRIVER_A62 8FD72000
80F95D80 RDEVD MTAACP RDCDRIVER_A62 8FD72000
80F9C1C0 RDEVE MTAACP RDCDRIVER_A62 8FD72000
80F9F0C0 RDEVF MTAACP RDCDRIVER_A62 8FD72000
80FA4100 RDEVG MTAACP RDCDRIVER_A62 8FD72000
80FCF2C0 RDEVH MTAACP RDCDRIVER_A62 8FD72000
80FD0740 RDEVI MTAACP RDCDRIVER_A62 8FD72000
80FD0880 RDEVJ MTAACP RDCDRIVER_A62 8FD72000
80FD2E80 RDEVK MTAACP RDCDRIVER_A62 8FD72000
80FD52C0 RDEVL MTAACP RDCDRIVER_A62 8FD72000
80FD72C0 RDEVM MTAACP RDCDRIVER_A62 8FD72000
80FDD2C0 RDEVN MTAACP RDCDRIVER_A62 8FD72000
80FE0800 RDEVO MTAACP RDCDRIVER_A62 8FD72000
80FEF2C0 RDEVP MTAACP RDCDRIVER_A62 8FD72000
81154C00 LAST SYS$LASTDRIVER B3884000
80FEA8C0 SPLAV3$DAD F11XQP SYS$DADDRIVER B3158000
80FFC540 LAD SYS$LADDRIVER B389C000
80F5FA40 HSJ010$DUA F11XQP SYS$DUDRIVER 8FCF5200
80FB9FC0 HSJ010$MUA MTAACP SYS$TUDRIVER 8FD22000
80F9CE80 HSJ008$DUA F11XQP SYS$DUDRIVER 8FCF5200
80FC3FC0 HSJ008$MUA MTAACP SYS$TUDRIVER 8FD22000
80FA3AC0 HSJ009$DUA F11XQP SYS$DUDRIVER 8FCF5200
80FC9FC0 HSJ009$MUA MTAACP SYS$TUDRIVER 8FD22000
80FCFFC0 HSC103$MUA MTAACP SYS$TUDRIVER 8FD22000
80FAFF80 HSJ011$DUA F11XQP SYS$DUDRIVER 8FCF5200
80E260C0 HSJ011$MUA MTAACP SYS$TUDRIVER 8FD22000
810AD080 SPLAV0$DUA F11XQP SYS$DUDRIVER 8FCF5200
Analyze Image 25-JAN-1997 16:57:55.66 Page 2
SYS$COMMON:[SYS$LDR]SYS$TUDRIVER.EXE;1
ANALYZ A05-19
Image Identification Information
image name: "SYS$TUDRIVER"
image file identification: "X-3"
image file build identification: "X61Q-SSB-0000"
link date/time: 4-MAY-1995 22:50:12.04
linker identification: "A11-12"
Patch Information
There are no patches at this time.
Image Section Descriptors (ISD)
1) image section descriptor (36 bytes)
byte count: 73216
base virtual address: %X'00000000' (P0 space)
page fault cluster size: default
SPLAV3> mc sysman io con fya0:/noada/driver=sys$fydriver.exe
SPLAV3> sho dev FYa0
Device Device Error
Name Status Count
FYA0: Offline 0
SPLAV3> set h/hsc hsc103
%HSCPAD-I-LOCPROGEXE, Local program executing - type ^\ to exit, ^Y for prompt
HSC> show sys
25-Jan-1997 17:05:11.46 Boot: 23-Nov-1996 18:35:54.66 Up: 1510:29
Version: V850 System ID: %X00000000FF00 Name: HSC103
Front Panel: Enabled HSC Type: HSC70
Console Dump: Enabled
Automatic DITs: Enabled
Periodic DITs: Enabled, Interval = 1
Disk Allocation Class: 3 Tape Allocation Class: 3
Disk Drive Controller Timeout: 2 seconds
Disk Caching: Disabled
Maximum Tape Drives: 24
Maximum Formatters: 24
SETSHO-I Program Exit
^C
HSC> show tape
Unit Req Port Type State Version
10 9 2 TA90 Offline, Host PRL - Z
Density: NORMAL COMPACTED FMC - 30, FHV - 5
12 9 2 TA90 Offline, Host PRL - Z
Density: NORMAL COMPACTED FMC - 30, FHV - 5
SETSHO-I Program Exit
^C
HSC> sho requestor
Req Status Type Version Microcode Loaded
0 Enabled P.ioj
1 Enabled K.ci MC- 54 DS- 2 Pila-64 K.pli-5 n/a
2/A Enabled Empty
3/B Enabled Empty
4/C Enabled Empty
5/D Enabled Empty
6/E Enabled Empty
7/F Enabled Empty
8/M Enabled Empty
9/N Enabled K.si MC- 21 DS- 3 tape
SETSHO-I Program Exit
| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 2184.1 | Possible tudriver problem | COOKIE::MCCLELLAND | Marty, SLS/MDMS Engineering | Mon Feb 10 1997 11:51 | 26 |
|
> When will this be corrected, in the meantime could you post this problem
> in the Known Problems and Restrictions for next SLS release if not
> included yet or not corrected yet.
> (this problem was discover one year ago ,see IPMT CFS.30925 )
IPMT case CFS.30925 was assigned to VMS engineering. It involved
a TUDRIVER issue fixed in V7.1. It definitely is not an SLS/MDMS
restriction.
Your current problem with the TA90 may or may not be the same problem.
Here is a short synopsis of that problem:
- IO$_PACKACK would return SS$_NORMAL when the drive was empty (i.e.
no media in the drive). This led storage management software to
fail when attempting to read the label of a cartridge because a
volume invalid (VOLINV) error was returned instead of a medium
off-line (MEDOFL) error. The problem was isolated to the Alpha
TUDRIVER only (the VAX version worked well).
If you believe this to be the problem, check with VMS engineering..
there may be a remedial or eco available for versions earlier than
V7.1.
Hope this helps,
Marty
|
| 2184.2 | What's the status for this problem | BACHUS::RENTY | | Thu Feb 20 1997 09:00 | 11 |
| We are curently investigating an SLS problem with a new TL810
configuration on an AXP, giving the error message VOLINV, or about the
same symptoms as described in the base note 2184.0.
1. 2184.1 mentions a problem with the TUDRIVER : is there a new
version for this driver ?
2. I couldn't find information about the CLD CFS.30925 : is this the
right IPMT number ?
Bart
|
| 2184.3 | | COOKIE::MCCLELLAND | Marty, SLS/MDMS Engineering | Fri Feb 21 1997 11:18 | 11 |
|
Hi Bart,
The ipmt case CFS.30925 is an old one. It went to vms eng as a sev 3
case, and as for all sev 3 cases, was auto-closed in ipmt. After closure
it was purged from the ipmt database. Neat system, huh :-). To the
best of my knowledge, the fix never made it into an eco. It was to have
been fixed in 7.1, but I haven't confirmed that myself. Let me see if
I can get some more info from vms engineering.
Marty
|