Conference noted::ibmpc-95

Pete Johnson
DTN: 237-2489
SHRCTR::PJohnson <-- preferred

Wanted: cheap working PC monitor for our church.

    As a follow on to 2877.8, did anyone upgrade their VLB motherboard to a
    Pentium and be willing to sell a good VLB EIDE controller?  Must have
    16550 serial ports included and be capable of LBA.  As an option, would
    anyone have an extra serial port card, again with 16550 chip for high
    speed external modem (28.8).
    
    Thanks,  Bob    ACISS2::BEJCEK
    

    
    I am looking for an inexpensive used PC, desktop or laptop, to be used 
    for word processing.  I am located in Nashua NH.
    
    Beth Scaer
    dtn 381-6001
    MOLAR::SCAER

    
    I'm looking for an inexpensive 15" or 17" monitor.
    
    Bob Bliss
    dtn 297-3310
    Relyon::Bliss
    

A technically dated guy looking for a simple compiler / interpreter
language that will run under W95 or WFW.  Perhaps something like
QuickBasic or (gawd forbid) Cobol.  Any kits laying around?  

I have both Visual C++ and VisualBasic kits but I just don't have time
to learn them.  My application does not need all the visual wiz-bangs.
Just simple text manipulation, little arithmetic, table lookups and record I/O. 

Any products or ideas? 

Purchase or trade.

		Tim Dolan
		dtn 276-8222 	!prefer no phone calls
		Stowoa::tDolan
MsexChange
 preferred	Timothy Dolan 	
		Tdolan@mail.dec.com

>I have both Visual C++ and VisualBasic kits but I just don't have time
>to learn them.  My application does not need all the visual wiz-bangs.
>Just simple text manipulation, little arithmetic, table lookups and record I/O. 

tim - you can't get much simpler that V-Basic!  stop by some time and I'll have
you runnning in 15 minutes or less!

-mark

    Does anybody a USB connector faceplate to attached to the case and 
    motherboard.
    

    Looking for a 16 bit ISA non-PNP sound card.  Sound blaster compatable and
    must come with drivers for windows 3.1 at least.
    
    Send mail to SSDEVO::ASTOR
    
    Thanks,
    
    Kurt

    
    Looking for a manual or a few copied pages for a DEC LPV-16 plotter,
    the same animal as an HP 7450.
    
    Basically, I need the switch setting info and how to load and unload
    the pens.
    
    Any help will be greatly appreciated!
    
    
    Kevin
    pcbuoa::mcquade

    Kevin,
    
    let me know in a day or so if you still don't have any reply from North
    America - the CSC library here has a copy of some of the manual, and
    I'm willing to run a copy off for you, but I'm located in Oz.
    
    H

I'm looking for DOS (preferably 6.22) and Windows for Workgroups 3.11 cheap.
I just need the license.

This is for a new PC I'm building for my church.

/carl

I'm looking for up to 3 inexpensive CD-ROM drives.  I'd prefer 2x or faster
but would consider a 1x.

/carl

    Carl,
    
      You might want to mention what type of interface you are looking for
    in the CD-ROM drive.  I have an old proprietary drive.  Not sure of the
    interface name, but it worked on a PAS16.
    
    regards,
    
    Kurt

I'm looking for a CDROM drive  with an IDE controller.
email granpa::kilgore or Dan Kilgore @cop
Just need it to load software.  Old and cheap preferred.

Dan,

	Wanted: Old/Used PC Computer Case (desktop or minitower)

	Contact:	Howard Drobner
			DTN;	223-5081
			email;	lando::drobner
		
	Looking for something you have in your scrap box.  I do NOT
        need power supply, motherboard, or anything else inside the box.

	My need is mounting of some monitoring equipment in the case.

	I work at PKO3 (Parker Street, Maynard, MA) and live in the
	Boylston/Northboro, MA area.

	Price range; Take it off your hands to a reasonable amount.

	Thanks/Howard

	Cross-posted to: tekvax::electro_hobby, noted::ibmpc-95

    Looking for a midi adapter: SoundBlaster or similar card to 1 midi in
    and 1 midi out.  This is for a highschool student with a limited
    budget.
    
    Joan Deaderick
    PENUTS::DEADERICK
    dtn 236-2553
    

    I'm looking for a hard drive.  IDE prefered but will consider SCSI. 
    Anywhere from 200MB up.  	Internal or external.
    
    Solvit::Allen_R or 603-483-8801

    
    I'm looking for an internal 9600 baud modem to put in my spare pc for
    my to wife to use.  Needs to have fax capapbility.  Brand not
    as important as cheap price.  8^}  
    
    Bert Grubbs
    tsc::Grubbs
    719-495-1874 (work from home)

    	Brain Transplant Rejected!
    
    The newer AMD 486 DX4 chips don't work in old ASUS PVI-486SP3
    motherboards.  AMD seems to have 'enhanced' them in a way that
    renders them inert in some not-so-current boards.  Would someone
    like to swap  their 'old' AMD 486-DX100 for my 'new' model?  Be
    prepared with the model number off the chip.
    
    Franklin Haskell
    DTN 381-2941
    SMURF::HASKELL
    haskell@zk3.dec.com
     

    looking for used but working 4X IDE or SCSI CDROM drive. bare drive
    is just fine. Found 8x and above everywhere, but I want this auxillary
    drive to be cheap and speed is not as important.
    
    Looking for one about $30-$40 or so.
    
    Mark Harris, harrisma@mail.dec.com, 521-4013

    
    The Obediah Brown public school (an inner city school) in Providence, RI 
    is in need of an Intel server to serve 10 networked PCs that were just 
    donated to them last week.
    
    Is there anyone out there who has a suitable system and would like a
    tax deduction?  I think the minimum system to support the network
     would have to be a DX4-100 with a 1Gb hard drive, and a CD.  Of
    course, all donations are welcome.
    
    Thanks for your help.
    
    Mimi Struck
    381-2274 
    thunda::struck
    struck@mail.dec.com

Jon Siegel
DTN 297-8193
MILKWY::JSIEGEL
MRO1

Anyone getting rid of some 4M, 30 pin memory?  I'd like to buy it if the price is right.

thnx,

	Jon

    Jimmy Chang
    225-5946
    Bigq::CHANG
    HLO
    
    If you're getting rid of some 4M, 30 pin memory?
    Send me a note.  Would like to get some if the price is right!
    
    
    

    
    I'm looking for a Media Vision Pro Audio Spectrum (or Studio) 16
    with a SCSI controller.  Drivers and bundled software a plus, but
    not essential.
    
    Please respond to:  EPS::CREAN
    
    Thanks,
    
      KC

    Kevin J. Crean                     Internet: kevin.crean@zko.mts.dec.com
    Principal Software Engineer
    Application Systems Engineering
    DIGITAL Equipment Corporation                     Voice:  (603) 881-2177
    110 Spit Brook Road  (ZKO1-3/H41)
    Nashua,  NH  03062-2698                             FAX:  (603) 881-6061
    

Re: .-1

One possibility...

You might want to check out:  http://www.onsale.com/   (Modems/Soundcards)

They currently have a new PAS-16 w/SCSI that you can probably
get for $30-$60.  If you're not familiar, ONSALE is an on-line
auction clearinghouse for new and refurbed equipment.  The prices
can be very good to poor depending on the particular auction.

I think the PAS-16 ended up selling for $60 on Wednesday's auction --
it is currently bidding at $30 and the auction closes this afternoon.


Greg

    
    	Currently..., $30, 12 available, only 6 bid for @$30 & $8.95
    shipping.
    
    	To bid from here: change /inv/ to /bid/ on the url bar.
    
    
    McQ

.-1 McQuade


    ???

    I'm looking for an external modem that's new enough to be recognized by
    Windows 95.  Speed is not an issue as I plan to us this modem only as a
    dialer.  
    
    Nice to have but not critical:  If modem has ability to recognize
    inbound Caller ID.
    
    Send e-mail to: Rick Stetson @WKO
    		    MSDOA::STETSON
    		    stetson@mail.dec.com
    
    Please include Brand Name, Features list (if possible), asking price
    and business terms.
    
    THANKS!!
    
    Rick

    I have obtained a Logitech Fotoman FM-1 camera but without software. 
    Help?
    
    Ken

    did you check www.logitech.com
    
    They have a customer service section, and they can be reached in
    Fremont, california via phone (area code 510)
    
    Mark

I did check Logitech's website, but the best I could get to was email which 
I sent but have not received a reply yet.

Ken

    Wanted:  Sound Card
    
    16 bit sound card wanted.  Sound blaster compatible.
    
    Got an extra one lying around?  send mail to solvit::duhaime_k
    
    

    Wanted: 1995 Version of Turbo-Tax.
    
    jeb
    

    Jeb,
    
     If you still need Turbo-Tax call me Monday 8-4 EST @ 313-556-4762.
    
    Dennis

I want two 4mb 30pin SIMMS and wil swop two 72pin with Parity 4mb 
SIMMS.

Cheers,

Greg

hiltong@mail.dec.com

    I need some (5 or so) Intel chips.
    
    they are D27256-2  28pin DIPS .4 wide. This is used as a fuel injection
    memory chip (mi-80's)
    
    
    Paul Meredith
    Solvit::Meredith
    DTN 264 1393

    	Al Madison 
    	DTN 223-3832
    	MLOPCS::MADISON
    
    	Wanted a IDE hard drive 500MB or larger....inexpensive please.
    	All offers will be considered.
    	Thanks
    	AL
    

Doug Fyfe
star::fyfe
dtn: 8812567

Looking for small IDE drive. 200-500mb.

Doug.

I think I saw a reference here about a dec part number for a 5V adapter or 
5V variant for an AMD 5x86 133mhz chip, but I cannot now find it... 
What I think I saw may not even have been here, but there are not many other
places I would have seen it... 

Does anyone know what part I have in mind, or where I saw it ??

Maybe I am going mad, and just dreamed it... :-)

	JT:

Intel :^) are the only folks left that I can find that do 5V 486(...) 100+ chips.
Cyrix and AMD used to but I can now only find 3.x versions.
There are a couple of ads over here for Intel 5V chips and also 
a 5-3 adapter card [$44 ouch]. Try www.pcprogress.com f'rinstance.
I did once see a chip with converted that came from a DEC PC
but I have no idea what the DECspeak for it would be...

Looking for a 16MB module for a DECpc 425SE/433SE (aka AST Explorer).

I'll swap my 4MB module and some $$$.


Ron Preston
rock::preston (preferred)

    
    Looking for a simple-to-use word processor for a 386 running
    Windows 3.1.  I'm not interested in complex ones like Wordperfect
    or Microsoft Word.  I am interested in Microsoft Works or a similiar
    easy-to-use word processor for someone who is computer-phobic.
    
    Beth Scaer
    MOLAR::SCAER
    381-6001

    Is PCWrite still around? That wp was fairly easy to pick up
    and use. I'm sure though that there are other more current
    wp's around devoid of the boat-load of bells & whistles.
    
    bob

Looking for some easy-to-use genealogy software on floppies (my PC doesn't have
a CDROM drive).

Vicki Meagher
bookie::meagher
381-0836

I work in Nashua (ZKO) and live in Bedford, Mass.

    Louis DeFelippi
    223-0127
    PROXY::DEFELIPPI
    
    Wanted Turbo Pascal for windows for my 15 year old son who wants to
    take a summer course.  
    
    Louis

	Looking for a ~500MB IDE disk for my nephews system. He's
	running out of space on the exisiting 500MB disk. 
	Will pay around $50 for it. (that's how much I paid for
	the last one)

	thanks,

							mike

	Wondering what to do with that old system you spent thousands on and 
now has a street price of $300?

	American Stage Festival in Nashua and Milford NH (where I volunteer) is
looking for equipment donations so that they can equip the summer staff, mainly
for word processing applications.  Being an arts organization, they have no 
money to spend but they can offer you a tax write-off for the value of the
donated equipment.

	For their purposes, any 486 system (and possibly 386) system would be
great.  They'd even be happy to take your old 14" monitors and <=500 meg drives.
Complete systems (no need for audio) would be best but even parts might be
useful. (If you *want* to donate better stuff, don't let this stop you.)

	If you want more information, you can call me at DTN 381-1417 or
send mail to WAYLAY::GORDON, or you can call ASF directly at (603) 889-2330.
I can make reasonable arrangements to pick up equipment in the GMA.

	I gain no benefit from this other than helping to keep live theater
alive in Southern NH.


					--Doug Gordon