[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference noted::ibmpc-95

Title:	IBM PCs, clones, DOS, etc.
Notice:	Intro in 1-11, Windows stuff in NOTED::MSWINDOWS please
Moderator:	TARKIN::LINND

Created:	Tue Jan 03 1995
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	3023
Total number of notes:	28404

2985.0. "PCI slot not recognized." by TNPUBS::MARK () Fri Apr 11 1997 12:04

    I have a Venturis GL 6200 PC that needs an ethernet card installed into
    one of the PCI slots, however, the PCI slots are not enabled/recognized
    by the systyem. When I go into F2 for the BIOS setup, it does not show
    up, nor do I know how to make the system recognize it. Has anyone seen
    this or know how to have the PC acknowledge it?
    
    mc

T.R Title User Personal
Name Date Lines

2985.1 PCBUOA::KRATZ Fri Apr 11 1997 16:14 7

T.R	Title	User	Personal Name	Date	Lines
2985.1		PCBUOA::KRATZ		`Fri Apr 11 1997 16:14`	7
	There's no bells or whistles that go off when a PCI card is inserted. If it's supported by Windows95, it should see it on the bext boot. WindowsNT may need to be told about it (i.e. drivers installed manually). If it still doesn't work, there's various possibilities (riser card not seated well or bad, slot bad or garbage in slot, card not seated well or bad,...) K

    There's no bells or whistles that go off when a PCI card is inserted.
    If it's supported by Windows95, it should see it on the bext boot.
    WindowsNT may need to be told about it (i.e. drivers installed
    manually).  If it still doesn't work, there's various possibilities
    (riser card not seated well or bad, slot bad or garbage in slot, card
    not seated well or bad,...)
    K