| T.R | Title | User | Personal
Name | Date | Lines |
|---|
| 1034.1 | Current experience | STOHUB::STOSPT::EATON | Dan Eaton St.Louis,MO,USA, 445-6522 | Mon Feb 20 1995 19:12 | 11 |
| 1034.2 | Another happy customer | ANGST::EGOLF | John C. Egolf ZKO1-3/J33 DTN 381-0257 | Mon Feb 20 1995 23:53 | 4 |
| 1034.3 | Yet another happy customer | UNXA::RUCH | Hell has _my_ phone number | Tue Feb 21 1995 00:43 | 19 |
| 1034.4 | COMTRADE Credits | MKOTS3::HASKELL | Guerrilla Engineer | Tue Feb 21 1995 14:51 | 4 |
| 1034.5 | I am satisfied | CSC32::LONGRN::SHAW | Bob Shaw | Wed Feb 22 1995 16:35 | 11 |
| 1034.6 | | RUSURE::MCCARTHY | | Wed Feb 22 1995 17:20 | 27 |
| 1034.7 | follow up on an order | STOSPT::EATON | Dan Eaton St.Louis,MO,USA, 445-6522 | Tue Feb 28 1995 16:07 | 20 |
| 1034.8 | comtrade pc | FABSIX::J_SADIN | Freedom isn't free. | Mon Dec 02 1996 13:08 | 142 |
| 1034.9 | | FABSIX::J_SADIN | Freedom isn't free. | Wed Dec 04 1996 10:28 | 9 |
| 1034.10 | | FABSIX::J_SADIN | Freedom isn't free. | Tue Dec 24 1996 10:37 | 22 |
| 1034.11 | Counterfeit 'overclocked' Pentiums being seen... | JULIET::HARRIS_MA | Networks Sales Exec | Tue Dec 24 1996 14:43 | 11 |
| 1034.12 | | FABSIX::J_SADIN | Freedom isn't free. | Tue Dec 24 1996 14:49 | 5 |
| 1034.13 | | FABSIX::J_SADIN | Freedom isn't free. | Tue Dec 24 1996 16:18 | 6 |
| 1034.14 | | FABSIX::J_SADIN | Freedom isn't free. | Tue Dec 24 1996 16:29 | 157 |
| 1034.15 | | FABSIX::J_SADIN | Freedom isn't free. | Tue Dec 24 1996 16:29 | 56 |
| 1034.16 | | FABSIX::J_SADIN | Freedom isn't free. | Tue Dec 24 1996 16:29 | 97 |
| 1034.17 | | FABSIX::J_SADIN | Freedom isn't free. | Wed Jan 29 1997 19:40 | 13 |
|
Have a minor annoyance that I thought I'd air here:
Every now and then, when I power up my PC, I get a SIGNAL MISSING
message flashed up on my MAG monitor. If I shut off the PC and wiggle
the wires from the monitor to the PC, it boots up fine when I turn it
back on.
Bad cable/connector perhaps?
jim
|
| 1034.18 | Yes. | JULIET::HARRIS_MA | Networks Sales Exec | Wed Jan 29 1997 19:53 | 5 |
| Bad Cable/Connector Perhaps. (yes)
8-)
Mark
|
| 1034.19 | | FABSIX::J_SADIN | Freedom isn't free. | Wed Jan 29 1997 21:45 | 5 |
|
why, thank you, Mark. :)
|
| 1034.20 | More ? than Answers | CHIPS::LEIBRANDT | | Wed Jan 29 1997 23:30 | 17 |
|
Jim,
Have you ever just power cycled the monitor and/or system without
touching the cable to see what happens?
Does your monitor get powered up the same time as your PC (via a
power strip or maybe an outlet on the back of the PC's case? If
so, you might want to wait and turn the monitor on a few seconds
after you turn the system on. I've seen some strange behavior with
some monitors and video cards at power-up time, which might have to
do with the syncing of the monitor/card. If this works (or just power
cycling the monitor) the cable is probably OK. What is the video card
make/model?
Charlie
|
| 1034.21 | Try turning monitor on first | NETCAD::BATTERSBY | | Thu Jan 30 1997 12:44 | 16 |
| I've always seen it mentioned in pc user manuals, and eleswhere,
to power up the monitor first, then power up the pc box. This
provides time for the monitor electronics to power up so they
can present the signaling needed for the pc to recognize the
monitor type etc. It also minimizes voltage/current surges that
might be prevalent when both are powered up at the same time,
which could cause damage to either the monitor electronics or
to the video card in the pc box. It's also usually mentioned
when powering off, to power down the pc box first then shut off
monitor, to also minimize spikes and surges. So the advice is
usualy stated relative to monitor terms...
power on - monitor first power off - monitor last
Bob
|
| 1034.22 | Monitor first...last | CHIPS::LEIBRANDT | | Thu Jan 30 1997 18:29 | 5 |
|
re: last
Yeah...I could have got that backasswards :^).
|
| 1034.23 | | FABSIX::J_SADIN | Freedom isn't free. | Sun Feb 02 1997 14:02 | 9 |
|
I've been powering the monitor up AFTER I power up the PC, so maybe
that's my issue. The video card is a Diamond Stealth with 4MB VRAM...
thanks!
jim
|