Conference noted::decnis

3520.0. "Configurator WARNINGS - need help" by SCASS1::ROCHELEAU (Rod Rocheleau - 972-527-2272) Fri Jan 24 1997 14:28

The following is the .LIS file from a Digital UNIX compile. 3.1 installed
and x3.1.9 patch applied. The problem is that we are getting 3 WARNINGS
that seam to indicate a bridge port is being modified after it is enabled.

I am unsure what to do to correct these WARNINGS, the bridge port is created
in the configurator and no futher actions are taken in the extra files
to affect the port. Is this perhaps a problem with the data file for
the configurator, we went from 2.3.14 to 3.1.9

------------ nis_scans2.lis --------------

Copyright Digital Equipment Corporation 1995. All rights reserved.

Restricted Rights: Use, duplication, or disclosure by the U.S. Government
is subject to restrictions as set forth in subparagraph (c)(1)(ii) of DFARS
252.227-7013, or in FAR 52.227-19, or in FAR 52.227-14 Alt. III, as
applicable.

This software is proprietary to and embodies the confidential technology of
Digital Equipment Corporation. Possession, use, or copying of this software
and media is authorized only pursuant to a valid written license from
Digital or an authorized sublicensor.


! script directive 1
create event dispatcher

! script directive 2
create event dispatcher outbound stream Event_Stream

! script directive 3
set event dispatcher outbound stream Event_Stream sink address { ( [ -
DNA_CMIP-MICE ] , [ DNA_SessionControlV2 , Number = 82 ] , [ DNA_NSP ] , [ -
DNA_OSInetwork , 49::00-17:AA-00-04-00-5B-5C:20 ] ) }

! script directive 4
create modem connect

! script directive 5
create csma-cd

! script directive 6
create fddi

! script directive 7
create mop

! script directive 8
create hdlc

! script directive 9
create ppp

! script directive 10
create chdlc

! script directive 11
create ddcmp

! script directive 12
create lapb

! script directive 13
create frbs

! script directive 14
create x25 protocol

! script directive 15
create x25 access

! script directive 16
create X25 access security dte class default

! script directive 17
create nsp

! script directive 18
create device

! script directive 19
create dtss

! script directive 20
create tcp

! script directive 21
Set hardware debug flags 0

! script directive 22
create bridge

! script directive 23
set bridge root priority 6

! script directive 24
create device unit W622-9-1 name W622-9-1

! script directive 25
create device unit W622-9-0 name W622-9-0

! script directive 26
create device unit W622-8-1 name W622-8-1

! script directive 27
create device unit W622-8-0 name W622-8-0

! script directive 28
create device unit W622-7-1 name W622-7-1

! script directive 29
create device unit W622-7-0 name W622-7-0

! script directive 30
create device unit W622-6-1 name W622-6-1

! script directive 31
create device unit W622-6-0 name W622-6-0

! script directive 32
create device unit W622-5-1 name W622-5-1

! script directive 33
create device unit W622-5-0 name W622-5-0

! script directive 34
create device unit W622-4-1 name W622-4-1

! script directive 35
create device unit W622-4-0 name W622-4-0

! script directive 36
create device unit L601-3 name L601-3

! script directive 37
create routing type L2Router , protocols { IP , ISO8473 }

! script directive 38
set routing phaseiv address 23.1021 , phaseiv prefix 49::

! script directive 39
set routing manual ip address 16.73.160.201

! script directive 40
set routing manual L1 algorithm routing vector

! script directive 41
set routing manual L2 algorithm routing vector

! script directive 42
set routing Integrated ISIS protocols { ISO8473 , IP }

! script directive 43
create routing network protocol ip

! script directive 44
set routing Maximum IP External Adjacencies 500 , Maximum IP External -
Destinations 500

! script directive 45
create csma-cd station L601-3-0 communication port L601-3-0

! script directive 46
create modem connect line W622-4-0 communication port W622-4-0 , profile -
"NORMAL"

! script directive 47
set modem connect line W622-4-0 modem control full , clock external , -
suppress test indicator TRUE

! script directive 48
create hdlc link W622-4-0 linktype balanced

! script directive 49
set hdlc link W622-4-0 physical line modem connect line W622-4-0 , preferred -
window size 127 , maximum data size 4500

! script directive 50
create hdlc link W622-4-0 logical station W622-4-0

! script directive 51
create modem connect line W622-4-1 communication port W622-4-1 , profile -
"NORMAL"

! script directive 52
set modem connect line W622-4-1 modem control full , clock external , -
suppress test indicator TRUE

! script directive 53
create hdlc link W622-4-1 linktype balanced

! script directive 54
set hdlc link W622-4-1 physical line modem connect line W622-4-1 , preferred -
window size 127 , maximum data size 4500

! script directive 55
create hdlc link W622-4-1 logical station W622-4-1

! script directive 56
create modem connect line W622-5-0 communication port W622-5-0 , profile -
"NORMAL"

! script directive 57
set modem connect line W622-5-0 modem control full , clock external , -
suppress test indicator TRUE

! script directive 58
create hdlc link W622-5-0 linktype balanced

! script directive 59
set hdlc link W622-5-0 physical line modem connect line W622-5-0 , preferred -
window size 127 , maximum data size 4500

! script directive 60
create hdlc link W622-5-0 logical station W622-5-0

! script directive 61
create modem connect line W622-5-1 communication port W622-5-1 , profile -
"NORMAL"

! script directive 62
set modem connect line W622-5-1 modem control full , clock external , -
suppress test indicator TRUE

! script directive 63
create hdlc link W622-5-1 linktype balanced

! script directive 64
set hdlc link W622-5-1 physical line modem connect line W622-5-1 , preferred -
window size 127 , maximum data size 4500

! script directive 65
create hdlc link W622-5-1 logical station W622-5-1

! script directive 66
create modem connect line W622-6-0 communication port W622-6-0 , profile -
"NORMAL"

! script directive 67
set modem connect line W622-6-0 modem control full , clock external , -
suppress test indicator TRUE

! script directive 68
create hdlc link W622-6-0 linktype balanced

! script directive 69
set hdlc link W622-6-0 physical line modem connect line W622-6-0 , preferred -
window size 127 , maximum data size 4500

! script directive 70
create hdlc link W622-6-0 logical station W622-6-0

! script directive 71
create modem connect line W622-6-1 communication port W622-6-1 , profile -
"NORMAL"

! script directive 72
set modem connect line W622-6-1 modem control full , clock external , -
suppress test indicator TRUE

! script directive 73
create hdlc link W622-6-1 linktype balanced

! script directive 74
set hdlc link W622-6-1 physical line modem connect line W622-6-1 , preferred -
window size 127 , maximum data size 4500

! script directive 75
create hdlc link W622-6-1 logical station W622-6-1

! script directive 76
create modem connect line W622-7-0 communication port W622-7-0 , profile -
"NORMAL"

! script directive 77
set modem connect line W622-7-0 modem control full , clock external , -
suppress test indicator TRUE

! script directive 78
create hdlc link W622-7-0 linktype balanced

! script directive 79
set hdlc link W622-7-0 physical line modem connect line W622-7-0 , preferred -
window size 127 , maximum data size 4500

! script directive 80
create hdlc link W622-7-0 logical station W622-7-0

! script directive 81
create modem connect line W622-7-1 communication port W622-7-1 , profile -
"NORMAL"

! script directive 82
set modem connect line W622-7-1 modem control full , clock external , -
suppress test indicator TRUE

! script directive 83
create hdlc link W622-7-1 linktype balanced

! script directive 84
set hdlc link W622-7-1 physical line modem connect line W622-7-1 , preferred -
window size 127 , maximum data size 4500

! script directive 85
create hdlc link W622-7-1 logical station W622-7-1

! script directive 86
create modem connect line W622-8-0 communication port W622-8-0 , profile -
"NORMAL"

! script directive 87
set modem connect line W622-8-0 modem control full , clock external , -
suppress test indicator TRUE

! script directive 88
create hdlc link W622-8-0 linktype balanced

! script directive 89
set hdlc link W622-8-0 physical line modem connect line W622-8-0 , preferred -
window size 127 , maximum data size 4500

! script directive 90
create hdlc link W622-8-0 logical station W622-8-0

! script directive 91
create modem connect line W622-8-1 communication port W622-8-1 , profile -
"NORMAL"

! script directive 92
set modem connect line W622-8-1 modem control full , clock external , -
suppress test indicator TRUE

! script directive 93
create hdlc link W622-8-1 linktype balanced

! script directive 94
set hdlc link W622-8-1 physical line modem connect line W622-8-1 , preferred -
window size 127 , maximum data size 4500

! script directive 95
create hdlc link W622-8-1 logical station W622-8-1

! script directive 96
create bridge port sca_lan port number 1

! script directive 97
set bridge port sca_lan data link entity csma-cd station L601-3-0 , port cost -
10

! script directive 98
create bridge port sca-sxo port number 2 , type remote

! script directive 99
set bridge port sca-sxo data link entity hdlc link W622-5-1 logical station -
W622-5-1 , port cost 10 , manual data link sdu size 4500

! script directive 100
set bridge port sca-sxo spanning tree enable FALSE

! script directive 101
create bridge port sca-dlo port number 3 , type remote

! script directive 102
set bridge port sca-dlo data link entity hdlc link W622-4-1 logical station -
W622-4-1 , port cost 10 , manual data link sdu size 4500

! script directive 103
set bridge port sca-dlo spanning tree enable FALSE

! script directive 104
create bridge port sca-oko port number 4 , type remote

! script directive 105
set bridge port sca-oko data link entity hdlc link W622-6-0 logical station -
W622-6-0 , port cost 10 , manual data link sdu size 4500

! script directive 106
set bridge port sca-oko spanning tree enable FALSE

! script directive 107
create bridge port sca-tso port number 5 , type remote

! script directive 108
set bridge port sca-tso data link entity hdlc link W622-6-1 logical station -
W622-6-1 , port cost 10 , manual data link sdu size 4500

! script directive 109
set bridge port sca-tso spanning tree enable FALSE

! script directive 110
create bridge port sca-omo port number 6 , type remote

! script directive 111
set bridge port sca-omo data link entity hdlc link W622-7-0 logical station -
W622-7-0 , port cost 10 , manual data link sdu size 4500

! script directive 112
set bridge port sca-omo spanning tree enable FALSE

! script directive 113
create bridge port sca-wio port number 7 , type remote

! script directive 114
set bridge port sca-wio data link entity hdlc link W622-7-1 logical station -
W622-7-1 , port cost 10 , manual data link sdu size 4500

! script directive 115
set bridge port sca-wio spanning tree enable FALSE

! script directive 116
create bridge port sca-opk port number 9 , type remote

! script directive 117
set bridge port sca-opk data link entity hdlc link W622-5-0 logical station -
W622-5-0 , port cost 10 , manual data link sdu size 4500

! script directive 118
set bridge port sca-opk spanning tree enable FALSE

! script directive 119
create bridge port sca-alf port number 13 , type remote

! script directive 120
set bridge port sca-alf data link entity hdlc link W622-4-0 logical station -
W622-4-0 , port cost 10 , manual data link sdu size 4500

! script directive 121
set bridge port sca-alf spanning tree enable FALSE

! script directive 122
create bridge port sca-temp port number 8 , type remote

! script directive 123
set bridge port sca-temp data link entity hdlc link W622-8-0 logical station -
W622-8-0 , port cost 10 , manual data link sdu size 4500

! script directive 124
set bridge port sca-temp spanning tree enable FALSE

! script directive 125
create routing circuit L601-3-0 type csma-cd

! script directive 126
set routing circuit L601-3-0 data link entity csma-cd station L601-3-0 , -
originating queue limit 32

! script directive 127
set routing circuit L601-3-0 Manual L2Only Mode FALSE

! script directive 128
set routing circuit L601-3-0 L1 cost 2 , L2 cost 2 , L1 router priority 127 , -
L2 router priority 127

! script directive 129
create routing circuit W622-4-0 type hdlc

! script directive 130
set routing circuit W622-4-0 data link entity hdlc link W622-4-0 logical -
station W622-4-0 , originating queue limit 32 , manual data link sdu size 4500

! script directive 131
set routing circuit W622-4-0 L1 cost 11 , L2 cost 11

! script directive 132
create routing circuit W622-4-1 type hdlc

! script directive 133
set routing circuit W622-4-1 data link entity hdlc link W622-4-1 logical -
station W622-4-1 , originating queue limit 32 , manual data link sdu size 4500

! script directive 134
set routing circuit W622-4-1 L1 cost 17 , L2 cost 17

! script directive 135
create routing circuit W622-5-0 type hdlc

! script directive 136
set routing circuit W622-5-0 data link entity hdlc link W622-5-0 logical -
station W622-5-0 , originating queue limit 32 , manual data link sdu size 4500

! script directive 137
set routing circuit W622-5-0 L1 cost 14 , L2 cost 14

! script directive 138
create routing circuit W622-5-1 type hdlc

! script directive 139
set routing circuit W622-5-1 data link entity hdlc link W622-5-1 logical -
station W622-5-1 , originating queue limit 32 , manual data link sdu size 4500

! script directive 140
set routing circuit W622-5-1 L1 cost 14 , L2 cost 14

! script directive 141
create routing circuit W622-6-0 type hdlc

! script directive 142
set routing circuit W622-6-0 data link entity hdlc link W622-6-0 logical -
station W622-6-0 , originating queue limit 32 , manual data link sdu size 4500

! script directive 143
set routing circuit W622-6-0 L1 cost 14 , L2 cost 14

! script directive 144
create routing circuit W622-6-1 type hdlc

! script directive 145
set routing circuit W622-6-1 data link entity hdlc link W622-6-1 logical -
station W622-6-1 , originating queue limit 32 , manual data link sdu size 4500

! script directive 146
set routing circuit W622-6-1 L1 cost 14 , L2 cost 14

! script directive 147
create routing circuit W622-7-0 type hdlc

! script directive 148
set routing circuit W622-7-0 data link entity hdlc link W622-7-0 logical -
station W622-7-0 , originating queue limit 32 , manual data link sdu size 4500

! script directive 149
set routing circuit W622-7-0 L1 cost 14 , L2 cost 14

! script directive 150
create routing circuit W622-7-1 type hdlc

! script directive 151
set routing circuit W622-7-1 data link entity hdlc link W622-7-1 logical -
station W622-7-1 , originating queue limit 32 , manual data link sdu size 4500

! script directive 152
set routing circuit W622-7-1 L1 cost 14 , L2 cost 14

! script directive 153
create routing circuit W622-8-0 type hdlc

! script directive 154
set routing circuit W622-8-0 data link entity hdlc link W622-8-0 logical -
station W622-8-0 , originating queue limit 32 , manual data link sdu size 4500

! script directive 155
set routing circuit W622-8-0 L1 cost 14 , L2 cost 14

! script directive 156
create routing circuit W622-8-1 type hdlc

! script directive 157
set routing circuit W622-8-1 data link entity hdlc link W622-8-1 logical -
station W622-8-1 , originating queue limit 32 , manual data link sdu size 4500

! script directive 158
set routing circuit W622-8-1 L1 cost 20 , L2 cost 20

! script directive 159
set routing circuit L601-3-0 subnet address { address = 16.73.160.201 , mask -
= 255.255.255.0 }

! script directive 160
set routing circuit L601-3-0 alternative subnet addresses { { address = -
16.73.80.201 , mask = 255.255.255.0 } , { address = 16.73.64.201 , mask = -
255.255.255.0 } , { address = 16.73.128.250 , mask = 255.255.255.0 } , { -
address = 16.73.144.201 , mask = 255.255.255.0 } }

! script directive 161
set routing circuit W622-4-0 subnet address { address = 16.252.162.1 , mask = -
255.255.255.0 }

! script directive 162
set routing circuit W622-4-1 subnet address { address = 16.252.170.1 , mask = -
255.255.255.0 }

! script directive 163
set routing circuit W622-5-0 subnet address { address = 16.252.212.1 , mask = -
255.255.255.0 }

! script directive 164
set routing circuit W622-5-1 subnet address { address = 16.252.213.1 , mask = -
255.255.255.0 }

! script directive 165
set routing circuit W622-6-0 subnet address { address = 16.252.214.1 , mask = -
255.255.255.0 }

! script directive 166
set routing circuit W622-6-1 subnet address { address = 16.252.215.1 , mask = -
255.255.255.0 }

! script directive 167
set routing circuit W622-7-0 subnet address { address = 16.252.222.1 , mask = -
255.255.255.0 }

! script directive 168
set routing circuit W622-7-1 subnet address { address = 16.252.223.1 , mask = -
255.255.255.0 }

! script directive 169
create routing control protocol RipTxRx type IP RIP

! script directive 170
set routing control protocol RipTxRx rip state Send and Receive

! script directive 171
set routing control protocol RipTxRx ip sources { 16.252.223.2 , 16.252.222.2 -
, 16.252.215.2 , 16.252.214.2 , 16.252.213.2 , 16.252.212.2 , 16.252.170.2 , -
16.252.162.2 , 16.73.160.200 }

! script directive 172
set routing control protocol RipTxRx ip subnets { { addr = 16.252.214.1 , -
mask = 255.255.255.0 } }

! script directive 173
add routing control protocol RipTxRx ip subnets { { addr = 16.73.160.201 , -
mask = 255.255.255.0 } , { addr = 16.252.215.1 , mask = 255.255.255.0 } }

! script directive 174
add routing control protocol RipTxRx ip subnets { { addr = 16.73.144.201 , -
mask = 255.255.255.0 } , { addr = 16.252.222.1 , mask = 255.255.255.0 } }

! script directive 175
add routing control protocol RipTxRx ip subnets { { addr = 16.73.128.250 , -
mask = 255.255.255.0 } , { addr = 16.252.223.1 , mask = 255.255.255.0 } }

! script directive 176
add routing control protocol RipTxRx ip subnets { { addr = 16.73.64.201 , -
mask = 255.255.255.0 } }

! script directive 177
add routing control protocol RipTxRx ip subnets { { addr = 16.73.80.201 , -
mask = 255.255.255.0 } }

! script directive 178
add routing control protocol RipTxRx ip subnets { { addr = 16.252.162.1 , -
mask = 255.255.255.0 } }

! script directive 179
add routing control protocol RipTxRx ip subnets { { addr = 16.252.170.1 , -
mask = 255.255.255.0 } }

! script directive 180
add routing control protocol RipTxRx ip subnets { { addr = 16.252.212.1 , -
mask = 255.255.255.0 } }

! script directive 181
add routing control protocol RipTxRx ip subnets { { addr = 16.252.213.1 , -
mask = 255.255.255.0 } }

! script directive 182
create mop circuit L601-3-0 type csma-cd

! script directive 183
set mop circuit L601-3-0 link name csma-cd station L601-3-0

! script directive 184
create mop circuit W622-4-0 type hdlc

! script directive 185
set mop circuit W622-4-0 link name hdlc link W622-4-0 logical station W622-4-0

! script directive 186
create mop circuit W622-4-1 type hdlc

! script directive 187
set mop circuit W622-4-1 link name hdlc link W622-4-1 logical station W622-4-1

! script directive 188
create mop circuit W622-5-0 type hdlc

! script directive 189
set mop circuit W622-5-0 link name hdlc link W622-5-0 logical station W622-5-0

! script directive 190
create mop circuit W622-5-1 type hdlc

! script directive 191
set mop circuit W622-5-1 link name hdlc link W622-5-1 logical station W622-5-1

! script directive 192
create mop circuit W622-6-0 type hdlc

! script directive 193
set mop circuit W622-6-0 link name hdlc link W622-6-0 logical station W622-6-0

! script directive 194
create mop circuit W622-6-1 type hdlc

! script directive 195
set mop circuit W622-6-1 link name hdlc link W622-6-1 logical station W622-6-1

! script directive 196
create mop circuit W622-7-0 type hdlc

! script directive 197
set mop circuit W622-7-0 link name hdlc link W622-7-0 logical station W622-7-0

! script directive 198
create mop circuit W622-7-1 type hdlc

! script directive 199
set mop circuit W622-7-1 link name hdlc link W622-7-1 logical station W622-7-1

! script directive 200
create mop circuit W622-8-0 type hdlc

! script directive 201
set mop circuit W622-8-0 link name hdlc link W622-8-0 logical station W622-8-0

! script directive 202
create mop circuit W622-8-1 type hdlc

! script directive 203
set mop circuit W622-8-1 link name hdlc link W622-8-1 logical station W622-8-1

! script directive 204
set session control application LES$CTF user name "" , password ""

! script directive 205
set session control application OBJ_19 user name "" , password ""

! script directive 206
set contact "ALF Command Center - 800-332-2468"

! script directive 207
set domain name "DEC:.sca"

! script directive 208
set location "SCA - Dallas TX"

! script directive 209
create snmp community "public"

! script directive 210
set snmp community "public" access read-only

! script directive 211
create snmp community SCT_snmp

! script directive 212
set snmp community SCT_snmp access read-write

! script directive 213
set snmp trap sinks { { destination = 16.72.64.32 , community = SCT_snmp } }

! script directive 214
set snmp generate authentication failure events FALSE

! open do file /usr/lib/dnet/nis_scans2_extra_create.ncl

! script directive 215
create mop client dlons1

! script directive 216
create mop client sxons1

! script directive 217
create mop client opkns1

! script directive 218
create mop client okons1

! script directive 219
create mop client tsons1

! script directive 220
create mop client omons1

! script directive 221
create mop client wions1

! script directive 222
create session control known tower .scads1 towers { ( [ DNA_CMIP-MICE ] , [ -
DNA_SessioncontrolV2 , number = 19 ] , [ DNA_NSP ] , [ DNA_OSInetwork , -
49::00-17:AA-00-04-00-5B-5C:20 ] ) }

! end of do file /usr/lib/dnet/nis_scans2_extra_create.ncl

! script directive 223
block event dispatcher outbound stream * global filter = ( ( Node , fddi , -
station , link ) , unrecog multi pdu dest )

! script directive 224
block event dispatcher outbound stream * global filter = ( ( Node , csma-cd , -
station ) , unrecog multi dest pdu )

! script directive 225
block event dispatcher outbound stream * global filter = ( ( Node , routing , -
circuit ) , initialization failure )

! script directive 226
block event dispatcher outbound stream * global filter = ( ( Node , routing ) -
, aged pdu discard )

! script directive 227
block event dispatcher outbound stream * global filter = ( ( Node , NSP , -
Local NSAP , remote NSAP ) , remote protocol error )

! script directive 228
block event dispatcher outbound stream * global filter = ( ( Node , routing ) -
, Address Unreachable PDU Discard )

! script directive 229
block event dispatcher outbound stream * global filter = ( ( Node , routing ) -
, IP Address Unreachable Packet Discard )

! script directive 230
block event dispatcher outbound stream * global filter = ( ( Node , routing , -
circuit ) , Adjacency State Change )

! script directive 231
block event dispatcher outbound stream * global filter = ( ( Node , routing ) -
, PhaseIV Translation Failure )

! script directive 232
block event dispatcher outbound stream * global filter = ( ( Node , routing , -
circuit ) , ID Reachability Change )

! script directive 233
block event dispatcher outbound stream * global filter = ( ( Node , routing ) -
, IP source address error packet discard )

! open do file /usr/lib/dnet/nis_scans2_extra_set.ncl

! script directive 234
set mop client dlons1 circuit W622-4-1

! script directive 235
set mop client dlons1 address = { 08-00-2B-A0-C0-70 }

! script directive 236
set mop client dlons1 system image { -
":.scads1::/usr/lib/mop/nis031_dlons1.sys" }

! script directive 237
set mop client dlons1 script file { ":.scads1::/usr/lib/mop/nis_dlons1.cmip" }

! script directive 238
set mop client dlons1 dump file { ":.scads1::/usr/lib/mop/nis_dlons1.dump" }

! script directive 239
set mop client dlons1 Phase IV Host Name = scads1

! script directive 240
set mop client dlons1 Phase IV Host Address = 23.91

! script directive 241
set mop client dlons1 Phase IV client name = dlons1

! script directive 242
set mop client dlons1 Phase IV client address = 23.1009

! script directive 243
set mop client opkns1 circuit W622-5-0

! script directive 244
set mop client opkns1 address = { 08-00-2B-A4-48-80 }

! script directive 245
set mop client opkns1 system image { -
":.scads1::/usr/lib/mop/nis031_opkns1.sys" }

! script directive 246
set mop client opkns1 script file { ":.scads1::/usr/lib/mop/nis_opkns1.cmip" }

! script directive 247
set mop client opkns1 dump file { ":.scads1::/usr/lib/mop/nis_opkns1.dump" }

! script directive 248
set mop client opkns1 Phase IV Host Name = scads1

! script directive 249
set mop client opkns1 Phase IV Host Address = 23.91

! script directive 250
set mop client opkns1 Phase IV client name = opkns1

! script directive 251
set mop client opkns1 Phase IV client address = 23.1010

! script directive 252
set mop client sxons1 circuit W622-5-1

! script directive 253
set mop client sxons1 address = { 08-00-2B-A0-20-10 }

! script directive 254
set mop client sxons1 system image { -
":.scads1::/usr/lib/mop/nis031_sxons1.sys" }

! script directive 255
set mop client sxons1 script file { ":.scads1::/usr/lib/mop/nis_sxons1.cmip" }

! script directive 256
set mop client sxons1 dump file { ":.scads1::/usr/lib/mop/nis_sxons1.dump" }

! script directive 257
set mop client sxons1 Phase IV Host Name = scads1

! script directive 258
set mop client sxons1 Phase IV Host Address = 23.91

! script directive 259
set mop client sxons1 Phase IV client name = sxons1

! script directive 260
set mop client sxons1 Phase IV client address = 23.1002

! script directive 261
set mop client okons1 circuit W622-6-0

! script directive 262
set mop client okons1 address = { 08-00-2B-A4-C3-40 }

! script directive 263
set mop client okons1 system image { -
":.scads1::/usr/lib/mop/nis031_okons1.sys" }

! script directive 264
set mop client okons1 script file { ":.scads1::/usr/lib/mop/nis_okons1.cmip" }

! script directive 265
set mop client okons1 dump file { ":.scads1::/usr/lib/mop/nis_okons1.dump" }

! script directive 266
set mop client okons1 Phase IV Host Name = scads1

! script directive 267
set mop client okons1 Phase IV Host Address = 23.91

! script directive 268
set mop client okons1 Phase IV client name = okons1

! script directive 269
set mop client okons1 Phase IV client address = 23.1014

! script directive 270
set mop client tsons1 circuit W622-6-1

! script directive 271
set mop client tsons1 address = { 08-00-2B-A4-A2-80 }

! script directive 272
set mop client tsons1 system image { -
":.scads1::/usr/lib/mop/nis031_tsons1.sys" }

! script directive 273
set mop client tsons1 script file { ":.scads1::/usr/lib/mop/nis_tsons1.cmip" }

! script directive 274
set mop client tsons1 dump file { ":.scads1::/usr/lib/mop/nis_tsons1.dump" }

! script directive 275
set mop client tsons1 Phase IV Host Name = scads1

! script directive 276
set mop client tsons1 Phase IV Host Address = 23.91

! script directive 277
set mop client tsons1 Phase IV client name = tsons1

! script directive 278
set mop client tsons1 Phase IV client address = 23.1013

! script directive 279
set mop client omons1 circuit W622-7-0

! script directive 280
set mop client omons1 address = { 08-00-2B-A4-C0-40 }

! script directive 281
set mop client omons1 system image { -
":.scads1::/usr/lib/mop/nis031_omons1.sys" }

! script directive 282
set mop client omons1 script file { ":.scads1::/usr/lib/mop/nis_omons1.cmip" }

! script directive 283
set mop client omons1 dump file { ":.scads1::/usr/lib/mop/nis_omons1.dump" }

! script directive 284
set mop client omons1 Phase IV Host Name = scads1

! script directive 285
set mop client omons1 Phase IV Host Address = 23.91

! script directive 286
set mop client omons1 Phase IV client name = omons1

! script directive 287
set mop client omons1 Phase IV client address = 23.1018

! script directive 288
set mop client wions1 circuit W622-7-1

! script directive 289
set mop client wions1 address = { 08-00-2B-A4-79-20 }

! script directive 290
set mop client wions1 system image { -
":.scads1::/usr/lib/mop/nis031_wions1.sys" }

! script directive 291
set mop client wions1 script file { ":.scads1::/usr/lib/mop/nis_wions1.cmip" }

! script directive 292
set mop client wions1 dump file { ":.scads1::/usr/lib/mop/nis_wions1.dump" }

! script directive 293
set mop client wions1 Phase IV Host Name = scads1

! script directive 294
set mop client wions1 Phase IV Host Address = 23.91

! script directive 295
set mop client wions1 Phase IV client name = wions1

! script directive 296
set mop client wions1 Phase IV client address = 23.1000

! script directive 297
set routing phaseiv maximum area 59

! script directive 298
set routing maximum path splits 1

! script directive 299
set device unit l601-3 number of buffers 2062

! script directive 300
set device unit w622-4-0 number of buffers 1480

! script directive 301
set device unit w622-4-1 number of buffers 1480

! script directive 302
set device unit w622-5-0 number of buffers 1480

! script directive 303
set device unit w622-5-1 number of buffers 1480

! script directive 304
set device unit w622-6-0 number of buffers 1480

! script directive 305
set device unit w622-6-1 number of buffers 1480

! script directive 306
set device unit w622-7-0 number of buffers 1480

! script directive 307
set device unit w622-7-1 number of buffers 1480

! script directive 308
set device unit w622-8-0 number of buffers 1480

! script directive 309
set device unit w622-8-1 number of buffers 1480

! script directive 310
block event dispatcher outbound stream * global filter = ( ( node , routing ) -
, Aged IP Packet discard )

! script directive 311
block event dispatcher outbound stream * global filter = ( ( node , routing ) -
, IP Protocol Unreachable Packet Discard )

! script directive 312
block event dispatcher outbound stream * global filter = ( ( Node , routing , -
circuit ) , Adjacency State Change )

! script directive 313
block event dispatcher outbound stream * global filter = ( ( Node , routing ) -
, IP Destination Address Error Packet Discard )

! script directive 314
block event dispatcher outbound stream * global filter = ( ( Node , routing ) -
, PDU Format Error )

! script directive 315
block event dispatcher outbound stream * global filter = ( ( Node , routing , -
circuit ) , IP Fragmentation Failure )

! end of do file /usr/lib/dnet/nis_scans2_extra_set.ncl

! script directive 316
enable event dispatcher outbound stream Event_Stream

! script directive 317
enable event dispatcher

! script directive 318
enable function address watch

! script directive 319
set device unit W622-9-1 auto load false

! script directive 320
enable device unit W622-9-1

! script directive 321
load device unit W622-9-1

! script directive 322
set device unit W622-9-1 auto load true

! script directive 323
set device unit W622-9-0 auto load false

! script directive 324
enable device unit W622-9-0

! script directive 325
load device unit W622-9-0

! script directive 326
set device unit W622-9-0 auto load true

! script directive 327
set device unit W622-8-1 auto load false

! script directive 328
enable device unit W622-8-1

! script directive 329
load device unit W622-8-1

! script directive 330
set device unit W622-8-1 auto load true

! script directive 331
set device unit W622-8-0 auto load false

! script directive 332
enable device unit W622-8-0

! script directive 333
load device unit W622-8-0

! script directive 334
set device unit W622-8-0 auto load true

! script directive 335
set device unit W622-7-1 auto load false

! script directive 336
enable device unit W622-7-1

! script directive 337
load device unit W622-7-1

! script directive 338
set device unit W622-7-1 auto load true

! script directive 339
set device unit W622-7-0 auto load false

! script directive 340
enable device unit W622-7-0

! script directive 341
load device unit W622-7-0

! script directive 342
set device unit W622-7-0 auto load true

! script directive 343
set device unit W622-6-1 auto load false

! script directive 344
enable device unit W622-6-1

! script directive 345
load device unit W622-6-1

! script directive 346
set device unit W622-6-1 auto load true

! script directive 347
set device unit W622-6-0 auto load false

! script directive 348
enable device unit W622-6-0

! script directive 349
load device unit W622-6-0

! script directive 350
set device unit W622-6-0 auto load true

! script directive 351
set device unit W622-5-1 auto load false

! script directive 352
enable device unit W622-5-1

! script directive 353
load device unit W622-5-1

! script directive 354
set device unit W622-5-1 auto load true

! script directive 355
set device unit W622-5-0 auto load false

! script directive 356
enable device unit W622-5-0

! script directive 357
load device unit W622-5-0

! script directive 358
set device unit W622-5-0 auto load true

! script directive 359
set device unit W622-4-1 auto load false

! script directive 360
enable device unit W622-4-1

! script directive 361
load device unit W622-4-1

! script directive 362
set device unit W622-4-1 auto load true

! script directive 363
set device unit W622-4-0 auto load false

! script directive 364
enable device unit W622-4-0

! script directive 365
load device unit W622-4-0

! script directive 366
set device unit W622-4-0 auto load true

! script directive 367
set device unit L601-3 auto load false

! script directive 368
enable device unit L601-3

! script directive 369
load device unit L601-3

! script directive 370
set device unit L601-3 auto load true

! script directive 371
enable routing control protocol RipTxRx

! script directive 372
enable routing

! script directive 373
enable x25 access

! script directive 374
enable nsp

! script directive 375
enable dtss

! script directive 376
enable tcp

! script directive 377
enable bridge

! script directive 378
enable csma-cd station L601-3-0

! script directive 379
enable modem connect line W622-4-0

! script directive 380
enable hdlc link W622-4-0

! script directive 381
enable hdlc link W622-4-0 logical station W622-4-0

! script directive 382
enable modem connect line W622-4-1

! script directive 383
enable hdlc link W622-4-1

! script directive 384
enable hdlc link W622-4-1 logical station W622-4-1

! script directive 385
enable modem connect line W622-5-0

! script directive 386
enable hdlc link W622-5-0

! script directive 387
enable hdlc link W622-5-0 logical station W622-5-0

! script directive 388
enable modem connect line W622-5-1

! script directive 389
enable hdlc link W622-5-1

! script directive 390
enable hdlc link W622-5-1 logical station W622-5-1

! script directive 391
enable modem connect line W622-6-0

! script directive 392
enable hdlc link W622-6-0

! script directive 393
enable hdlc link W622-6-0 logical station W622-6-0

! script directive 394
enable modem connect line W622-6-1

! script directive 395
enable hdlc link W622-6-1

! script directive 396
enable hdlc link W622-6-1 logical station W622-6-1

! script directive 397
enable modem connect line W622-7-0

! script directive 398
enable hdlc link W622-7-0

! script directive 399
enable hdlc link W622-7-0 logical station W622-7-0

! script directive 400
enable modem connect line W622-7-1

! script directive 401
enable hdlc link W622-7-1

! script directive 402
enable hdlc link W622-7-1 logical station W622-7-1

! script directive 403
enable modem connect line W622-8-0

! script directive 404
enable hdlc link W622-8-0

! script directive 405
enable hdlc link W622-8-0 logical station W622-8-0

! script directive 406
enable modem connect line W622-8-1

! script directive 407
enable hdlc link W622-8-1

! script directive 408
enable hdlc link W622-8-1 logical station W622-8-1

! script directive 409
enable bridge port sca_lan

! script directive 410
enable bridge port sca-sxo

! script directive 411
enable bridge port sca-dlo

! script directive 412
enable bridge port sca-oko

! script directive 413
enable bridge port sca-tso

! script directive 414
enable bridge port sca-omo

! script directive 415
enable bridge port sca-wio

! script directive 416
enable bridge port sca-opk

! script directive 417
enable bridge port sca-alf

! script directive 418
enable bridge port sca-temp

! script directive 419
enable routing circuit L601-3-0

! script directive 420
enable routing circuit W622-4-0

! script directive 421
enable routing circuit W622-4-1

! script directive 422
enable routing circuit W622-5-0

! script directive 423
enable routing circuit W622-5-1

! script directive 424
enable routing circuit W622-6-0

! script directive 425
enable routing circuit W622-6-1

! script directive 426
enable routing circuit W622-7-0

! script directive 427
enable routing circuit W622-7-1

! script directive 428
enable routing circuit W622-8-0

! script directive 429
enable routing circuit W622-8-1

! script directive 430
enable mop circuit L601-3-0 function { loop request , load request , load -
server , dump request , dump server }

! script directive 431
enable mop circuit W622-4-0 function { loop request , load request , load -
server , dump request , dump server }

! script directive 432
enable mop circuit W622-4-1 function { loop request , load request , load -
server , dump request , dump server }

! script directive 433
enable mop circuit W622-5-0 function { loop request , load request , load -
server , dump request , dump server }

! script directive 434
enable mop circuit W622-5-1 function { loop request , load request , load -
server , dump request , dump server }

! script directive 435
enable mop circuit W622-6-0 function { loop request , load request , load -
server , dump request , dump server }

! script directive 436
enable mop circuit W622-6-1 function { loop request , load request , load -
server , dump request , dump server }

! script directive 437
enable mop circuit W622-7-0 function { loop request , load request , load -
server , dump request , dump server }

! script directive 438
enable mop circuit W622-7-1 function { loop request , load request , load -
server , dump request , dump server }

! script directive 439
enable mop circuit W622-8-0 function { loop request , load request , load -
server , dump request , dump server }

! script directive 440
enable mop circuit W622-8-1 function { loop request , load request , load -
server , dump request , dump server }

! script directive 441
enable snmp community "public"

! script directive 442
enable snmp community SCT_snmp

! script directive 443
enable snmp

! script directive 444
create bridge filter type 60-01

! script directive 445
block bridge filter type 60-01 port set { }

! script directive 446
create bridge filter type 60-04

! script directive 447
block bridge filter type 60-04 port set { }

! script directive 448
create bridge filter type 60-02

! script directive 449
block bridge filter type 60-02 port set { }

! script directive 450
set bridge port * other type disposition filter
WARNING - attribute Other!Type!Disposition on already ENABLED entity bridge port sca-temp

! script directive 451
set bridge port * other sap disposition filter
WARNING - attribute Other!SAP!Disposition on already ENABLED entity bridge port sca-temp

! script directive 452
set bridge port * other pid disposition filter
WARNING - attribute Other!PID!Disposition on already ENABLED entity bridge port sca-temp

! open do file /usr/lib/dnet/nis_scans2_extra_enable.ncl

! script directive 453
block bridge filter type 60-01 port set { sca-opk , sca-alf }

! end of do file /usr/lib/dnet/nis_scans2_extra_enable.ncl

! End of script

Rod,

Previously on Digital Unix (and on Ultrix when that was supported)
there was no attempt to check scripts for semantics or best
practice.

So in your version move you picked up the extra checking we now
try to do and the checker believes that in general it is better
to do sets before enables. For now you should just ignore the
warnings.

If it is, for some reason, essential for these sets to be done
after the enables, then I'll change the checker to ERROR them
if they are done too early. Otherwise the warnings will stay
(and in time the configurator might get changed). I will have
to talk to the experts.

Peter

Peter,

	If I understand the .1 message, the errors are coming out of the 
configurator and should be ignored. 

Correct,

Rod

I would say that it is the checker that is incorrect here.

For internal reasons any transaction to do with bridge filtering MUST be done
after the enables otherwise the configuration script will lock up.

Probably no-one else has reported this yet because the configurator only puts
those sets in for BLOCK by default set ups, many people use PASS by default and
that doesn't need any NCL as the entities default that way.


John

Looking at the code, a fix to suppress these warnings (but not to
enforce the correct rules) has already been done.

In .0 you say that you applied X3.1-9 as a fix kit but there is no
such thing. X3.1-9 is just an image and you should apply the V3.1-8
fix kit first to get all the configurator fixes. Please can you
do this and tell me whether the problem goes away (or not).

Thanks,
Peter

Peter,

	I will try to pull the fix kit and install it tomorrow.

Rod

Upgraded compiler to 3.1.8 and the warnings are gone ...

Thanks