[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

4404.0. "Incompatibility MCM V5.0 and V6.0 and firmware on mudules" by IJSAPL::VISSER_A () Tue May 13 1997 08:28

Hello,

I had problems connecting a DECconcentrator900MX (slot 4) to a backplane
channel using MCM v6.0 (CEARvisn V1.1a). Using MCM V5.0 there was no problem.
On the mudule in slot 8 there was a port in the laninterconnect but both ports
(a&b) are to the front pannel defined. In V5.0 this was ok.
I reread the release notes but I found nothing about firmware incompatbility.
Yes I think I have to upgrade but is this known? If so please give a note in
the releasenotes.


This is the configuration:

MAM V4.1.1
Slot Module    FW    Config
1    DC900MX  V3.1.1 Ring in
2    DC900MX  V3.1.1 a&b in backplane
3    DC900MX  V3.2.3 Ring out
4    DC900MX  V3.1.1 a&b in backplane (Unable to connect using V6.0 -add faild)
5    empty
6    empty
7    empty
8    DC900MX  V3.1.1 different ring a&b to front

Anton Visser
Network specialist The Netherlands

T.R	Title	User	Personal Name	Date	Lines
4404.1		NETCAD::MILLBRANDT	answer mam	`Wed May 14 1997 15:00`	3
	You must be running MAM V5.1 (or V5.0) if you are running MCM V6.0. Dotsie