[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

4365.0. "Hubwatch dies when managing a V5.0 HUB900" by PRIVAT::OTTO (getting better all the time) Thu Apr 17 1997 19:43

    
    Hi ,
    
    has anybody tried to manage a Hub900 with Firmware V5.0
    from a UNIX System using Hubwatch V4.1.1 ?
    
    Anyway when I try to do this Hubwatch dies with a segmentation fault.
    I downgraded the hub to V4.2.0 and then the UNIX based Hubwatch worked 
    again on the same Hub900.
    
    If this is to be expected ( hubwatch/chassismanager Version and the
    Firmware in the MAM must be compatible) what should we tell customers
    that use the UNIX platform ? (leave it ,change to WIN95/NT)
    
    OTTO

T.R Title User Personal
Name Date Lines

4365.1 NETCAD::MILLBRANDT answer mam Thu Apr 17 1997 21:06 9

T.R	Title	User	Personal Name	Date	Lines
4365.1		NETCAD::MILLBRANDT	answer mam	`Thu Apr 17 1997 21:06`	9
	You cannot run MAM V5.* with HUBwatch V.Anything.Whatsoever. It will not work. Read the Release Notes, that's what they're for. You must use clearVISN V1.1A. I don't know what's up with the clearVISN UNIX release. Til there is one, customers who are stuck on UNIX should use MAM V4.2. They cannot use VNswitches or MultiStack 600 modules in those hubs. Dotsie

You cannot run MAM V5.* with HUBwatch V.Anything.Whatsoever.  It will not
work.  Read the Release Notes, that's what they're for.  You must use 
clearVISN V1.1A.

I don't know what's up with the clearVISN UNIX release.  Til there is one,
customers who are stuck on UNIX should use MAM V4.2.  They cannot use
VNswitches or MultiStack 600 modules in those hubs.

	Dotsie