[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

157.0. "help on hubwatch and traps " by LYOISA::CROZET () Mon Feb 15 1993 17:09

    Hello,
    I am currently testing Hubwatch for Vms launched in Polycenter for a
    demo purpose. I can see color change when adding or removing a device
    on a repeater. I would like to alarm or notify DECmcc when something
    happens. 
    So i have two questions :
    
    1-Is there any way to set a trap and notify DECmcc ?
    I haven't see anything on the hubwatch documentation .
    
    2- We can set traps addresses on the agent : what kind of traps is issued ?
    
     If no solution , could somebody say me where to find a private MIB for
    the Decagent90 ?
    
    					Rgds
    					Jean-Paul
T.RTitleUserPersonal
Name		DateLines
157.1Traps require V1.1 of the DECagent 90MEMIT::FORRESTThu Feb 18 1993 16:2710
	Trap support requires V1.1 of the DECagent 90, due out about the 
	same time as HUBwatch V1.1 on VMS and ULTRIX (end of Q3?). The 
	final trap list is still being determined, but COLD START, WARM 
	START, and CONFIGURATION CHANGE are in.

	You should be able to configure some polling in DECmcc to generate 
	alarms till then.

	There is a copy of the MIB in note 68.1.