[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

4229.0. "Twisted Pair Full Duplex" by CGOWGS::GIBB (John Gibb Canadian Multi Vendor Support) Thu Feb 20 1997 13:49

Howdy,

I was wondering if anyone could tell me if any of our Twisted Pair repeater Hub Products support
Full Duplex mode?.

Any inputs would be appreciated..


Thanks

John Gibb

T.R	Title	User	Personal Name	Date	Lines
4229.1		NETCAD::DOODY	Michael Doody	`Thu Feb 20 1997 18:36`	13
	I think that's impossible, isn't it? All the ports on a repeater (or repeater group) are in the same collision domain. The reason switch ports can do full duplex is that each port has its own collision domain, and the packet is stored until it can be transmitted. The 600 series switches can do full duplex, and I'll bet the VNswitches can as well. The ethernet ports on the 900EE, 900EF can't. -Mike
4229.2	Thanks Mike	CGOWGS::GIBB	John Gibb Canadian Multi Vendor Support	`Thu Feb 20 1997 19:05`	10
	Thanks Mike.. It gets confusing when a DE500 is installed on a alpha and now you have various console settings for ew* modes of operation... Thanks again.. John Gibb
4229.3		CSC32::cxoras32.cxo.dec.com::Goodwin	Brad Goodwin - NSIS	`Thu Feb 20 1997 23:33`	1
	The VNswitch's can operate in full duplex mode.