[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

1649.0. "A couple of questions Hubwatch v2.0 and error" by TARUGO::MAITE () Wed Nov 02 1994 16:00



	Hi,

	A couple of questions about Hubwatch v2.0 for
	windows.

	-Is or not supported with this version (2.0) other
	drivers than NDIS. In SPD I could find only NDIS.
	In this case, when will be supported ODI?.

	-Can you load other TCP/IP than the TCP/IP from 
	Hubwatch?.

	-Any pointers to Doc. for v2.0?, Installation in PC side.

	-Any reference about the folloing error:

	When you are setting hubwatch the following error appears
	"Fatal error at script line 664"

	I am a beginner on Hubwatch.

	Maite
T.RTitleUserPersonal
Name		DateLines
1649.1V2.0 is old. Use 3.1SLINK::HOODI'd rather be at the PenobscotWed Nov 02 1994 16:246
Suggestion # 1...

Use HUBwatch for Windows V3.1, and not V2.0.
The release notes cover most of your questions.

See note 8 for kit location.
1649.2A little bit question, not so clear for meTARUGO::MAITEThu Nov 03 1994 13:1516
    
    Thanks a lot for your answer,
    
    I have copied the kits and trying to copy the kit.
    Meanwhile:
    I have read the READ-ME.txt, and I could see that some questions
    are answered. But I can not find anything about if is or not
    supported install Hubwatch with other TCP/IP stack, (my customer
    is trying with LAN Workplace e IPX).
    Please, I would need to know if he must install TCP/IP stack that 	
    Hubwatch provides (in v3.1 PATHWORKS v5.1 stack) or he can install	
    other and it is supported.
    
    Thanks in advance
    
    	maite
1649.3LAN Workplace tested w/ V3.1.0, checking supportNETCAD::WAGNERCOFFILThu Nov 03 1994 15:538
	LAN Workplace version 4.1 or greater has been tested to
	work with HUBwatch for Windows V3.1.0. YOU MUST USE NOVELL'S
	IP STACK AND NOT ONE INCLUDED IN THE HUBWATCH KIT. 

	Support of LAN Workplace is another issue...
	This will require a response from the Product Manager.

Barb