[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3844.0. "DECbridge 90 DEC/IEEE STP" by COMICS::BUTT (Give me the facts real straight.) Fri Sep 06 1996 09:07

    I have a DECbridge 90 in a mixed DEC/IEEE STP LAN. 
    
    To my surprise the bridge90 was sending out DEC bridge hellos with
    the IEEE root's MAC address as Root in the the DEC hellos.
    
    I hate to think what havoc this could cause !
    
    R.
T.RTitleUserPersonal
Name		DateLines
3844.1NPSS::RAUHALAFri Sep 06 1996 14:138
    Since there is no lockdown mode on the DB 90 it should migrate
    to IEEE mode.  Is there an LB 100 on the network?  There is also
    a new V4.0 image which has a change in the spanning tree code,
    however I am not 100% sure it would fix this problem.
    
    npss::public$dsk:[interchange]dewgb_v40.exe
    
    ken
3844.2Is there a problem here ??NETCAD::GORDONMon Sep 09 1996 16:008
    I just loaded the new dewgb V4.0 code in one of my bridge's....
    It never comes back online...MOD OK never gets active.
    A mop connect leaves me at the >> prompt.
    
    Anyone else have any problems with this new code ?????
    
    						Tim