Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
Moderator: | NETCAD::COLELLA DT |
Created: | Wed Nov 13 1991 |
Last Modified: | Fri Jun 06 1997 |
Last Successful Update: | Fri Jun 06 1997 |
Number of topics: | 4455 |
Total number of notes: | 16761 |
Has anyone had problems loading Clearvisn onto a DECpc 433W which is running Windows95 ? I have formatted my disks TWICE and reloaded '95 four times and Clearvisn untold times with the same result whereby if I start the Router Manager application up it brings up the Stonybrook icon and drops out. I have loaded this product many times on many different platforms but this is the first time this has happened with no obvious way around it. A few times it seems to have something to do with the ODBC driver but most times this installs fine. Any ideas ? Thanks in advance John Moretti Brisbane
T.R | Title | User | Personal Name | Date | Lines |
---|---|---|---|---|---|
3772.1 | Fixed | GIDDAY::MORETTI | Death is just a formality | Tue Aug 06 1996 03:24 | 22 |
I finally found the error of my ways !!! Just in case anyone else has this problem I had better let you know what I did. I had 2 drives C and D with windows95 installed on the D drive and WFW installed on the C drive. It seems that when Clearvisn updated the autoexec.bat and config.sys files it was creating these in the D:\WINDOWS directory but the files that needed updating were the ones in the C:\ directory. After I copied these files to the C:\ directory from the D:\WINDOWS directory all came good. Just another gotcha ...... need to pay attention more often tot the screens. Cheers John |