[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3733.0. "Router Configurator - IP stack compatibility?" by CSC32::J_SHUMWAY () Fri Jul 19 1996 18:52

    
A customer and I are having similar problems... When I access the network via 
W95 RAS I can load a Routeabout sucessfully. If I use Trumpet Winsock the ping
portion of the load fails. If I exit the configurator and use a ping utility
the router responds to the ping and I can also telnet to the router. Customer
is using TGV Multinet. He also gets a failure with the load, ping fails. If 
he exits the configurator he can ping and telnet the router. This appears to
be IP stack related. Anyone seen this behaviour? 

thanks,

joe
T.RTitleUserPersonal
Name		DateLines
3733.1Edit a file...duuh...34937::DANZAKTue Jul 23 1996 10:3712
    I believe that there is an .INI file somewhere that you need to change
    to enable trumpet management (i.e. SNMP)  by default it is NOT enabled.
    
    Needed to edit the file and add in the protocol types of SNMP etc...
    
    I went thru this when we had trumpet and I needed to install
    MANAGEworks.  I think that I found the answer in the MANAGEWORKS notes
    looking for TRUMPET etc...
    
    hope that helps,
    j