[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3661.0. "DECswitch 900EF/MP managability of the ethernet connectors?" by CTHU56::L_PELLAND (Luc Pelland. Hull. DTN 640-7218) Wed Jun 26 1996 17:01

Hello all,

One of my customer call me this morning and ask me if you can manage the
connector of the DECswitch 900EF/MP from the menu when you telnet in the
module. According to the documentation there should be 2 options in the
ethernet interface for connector configuration. They are "connector-location"
and "connector-type" (from the book network interface operations guide
chapter 2). On the customer config option and mine we do not see these 2
options. From the release notes we can read that HUBwatch can not be use to
manage the module but can be use for the LAN interconnect wich will allow us
to configure the ports.

We are both running version 1.0 of the software.

Now my questions.

Is there an error in the documentation for the interface operations guide?
If not is this feature will be added later?

Thank you
luc Pelland
T.RTitleUserPersonal
Name		DateLines
3661.1No...EDWIN::TOMG::gulickThose dirty rings !!Thu Jun 27 1996 12:557
If you're in a hub, you must use ClrVSN Chassis Manager to
configure the Ethernet ports. The Telnet CLI will not do
want do you want.

See the IROCZ::COMMON_BROUTERS notesfile for more details.

-tom
3661.2CTHU56::L_PELLANDLuc Pelland. Hull. DTN 640-7218Thu Jun 27 1996 15:434
Thank you for the pointer Tom.

Luc