[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3656.0. "defmi errorlog decoding please" by MQOOA::YDAIGNEAULT () Tue Jun 25 1996 21:16

	Hi, can I get those DECrepeater 90FS errlog entries decoded please. 
There is 8 units installed and we had to replace 2 so far with the same problem
s because the units keep on resetting. If further information is necessary, 
please ask, I have the unit with me.

					Thank you, Yves Daigneault.

DECrepeater 90FS
==============================================================================

DECrepeater 90FS, 2 port FO Ethernet Rptr SNMP, HW=v1,RO=v01.02,SW=V2.0.0
SysUpTime                                 : 00:03:50   219 resets
SNMP Read/Write Community                 : public
SNMP Trap Addresses                       : Not Configured
Status of Last Downline Upgrade           : No Status
Out-of-Band Management RTS                : Disabled
BootP                                     : Disabled

Interface     IP Address      Subnet Mask     Def. Gateway    Other Info
---------     ----------      -----------     ------------    ----------
Ethernet Port                                                 08-00-2B-B5-A5-D2
OBM Port                                                      Speed 9600 bps
Hub Mastership Enable                     : Off
Hub Master Configuration                  : Not Configured

==============================================================================


                       Press Return for Main Menu ...

DECrepeater 90FS
==============================================================================

                       DECrepeater 90FS INSTALLATION MENU

                     [1]  Reset with Factory Defaults
                     [2]  Reset with Current Settings
                     [3]  Show Current Settings
                     [4]  Configure IP ...
                     [5]  Dump Error Log
                     [6]  Downline Upgrade
                     [7]  Configure Out-of-Band Port ...
                     [8]  Module-Specific Options ...

==============================================================================

                        Enter selection number : 5



DECrepeater 90FS
==============================================================================

                                DUMP ERROR LOG
                            Current Reset Count: 219

==============================================================================


        Entry        = 200
        Time Stamp   = 0 8796
        Reset Count  = 213
        Fatal error: Line 1080, File ncsh.c


Dump another entry [Y]/N? y

        Entry        = 199
        Time Stamp   = 0 9679
        Reset Count  = 212
        Fatal error: Line 1080, File ncsh.c


Dump another entry [Y]/N? y

        Entry        = 198
        Time Stamp   = 0 6502
        Reset Count  = 211
        Fatal error: Line 1080, File ncsh.c


Dump another entry [Y]/N? y
==============================================================================

No more Error Log entries.
T.RTitleUserPersonal
Name		DateLines