[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3598.0. "ATM forum trap definitions?" by SNOFS1::63496::CHIUANDREW () Fri Jun 07 1996 00:50

    Hi,
    
    Could someone provide the ASN.1 definitions of the following traps
    defined by ATM forum:
    
    1) atmfVpcChange
    2) atmfVccChange
    
    
    PS: Customer is trying to implment trap from Polycenter Netview for
    monitoring Cisco ATM routers
    
    thanks in advance for help!
    Andrew Chiu - Network Services Sydney
T.RTitleUserPersonal
Name		DateLines
3598.1Wrong ConferenceFOUNDR::OUIMETTEZat was Zen, Dis is Dao...Fri Jun 07 1996 12:5618
	Hi Andrew,
    
    Normally it would be best to post your question in either the Cisco 
    (KERNEL::CISCO) or Polycenter Netview (NOTED::NETVIEW) conferences;
    this conference isn't overly related to your question topic.. :^)
    
    But in this case, look at note 1151.2 in the NETCAD::DEWBR conference,
    I think you'll find a solution for your cisco there, as the ATM mib
    variables are documented for NETVIEW there.... But if you
    still have problems with Polycenter after that, you may want to post
    them in the PNV conference.
    
    
    		Regards,
    
    -Chuck O.
     NPB router Interop