[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3591.0. "900EF filtering capabilities?" by CGOS01::DMARLOWE (Have you been HUBbed lately?) Tue Jun 04 1996 19:57

    How many address and protocol entries can be stored in a 900EF?
    
    Especially for source address filtering, can you filter all and then
    put addresses in that you wish to forward?  This may make the number of
    entries in the address table smaller.
    
    What a service provider is trying to do is provide some connectivity for
    customers between their own sites but keep inter-customer traffic
    separated.
    
    	------------------	A1 and A2 can communicate but cannot
    	!      900EF     !	see any packets from B or C.  B and C
    	------------------	would be able to see only their own also
    	 !  !  !  !  !  !	but no one elses.
    	 A1 B1 C1 A2 B2 C2
    
    Can filtering on the 900EF acheive this?
    
    dave
T.RTitleUserPersonal
Name		DateLines
3591.1Use VLAN capability of V1.6MOSCOW::FELIZHANKOThings can only get better...Wed Jun 05 1996 05:255
It's a VLAN capability, not filtering. New firmware V1.6 (will be free) of
DECswitch 900EF will do what you are looking for. However, you need clearVISN
VLAN Manager to configure VLANs and load the switches (not free).

Works just fine!