| Title: | DEChub/HUBwatch/PROBEwatch CONFERENCE |
| Notice: | Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7 |
| Moderator: | NETCAD::COLELLA DT |
| Created: | Wed Nov 13 1991 |
| Last Modified: | Fri Jun 06 1997 |
| Last Successful Update: | Fri Jun 06 1997 |
| Number of topics: | 4455 |
| Total number of notes: | 16761 |
Hi, A customer would like to get the following statistical data about their network: There is a decnet-only node which is used by a lot of other decnet node on WAN via a decrouter-250. Is it possible with Probewatch (or other tool) to filter the decnet traffic from and to this node, and gather the decnet addresses with which this node communicates? Thanks, Endre
| T.R | Title | User | Personal Name | Date | Lines |
|---|---|---|---|---|---|
| 3547.1 | Just attach a LAPTOP running IRIS near the node. | MSDOA::REED | John Reed @CBO = Network Services | Wed May 22 1996 13:08 | 13 |
I would use IRIS, which is a PC-based network monitoring tool, for
Digital Internal use only. It can be set to look at packets only
going TO or FROM your node in question, and will give you real-time
data, instead of the much slower process of loading the packetprobe
with commands, waiting for uploads, and decodes.
The packetprobe is really good for graphing, or comparing many
segments at once. but your need would be easily and simply met using
IRIS.
IRIS can be found at the RANGER::IRIS notes conference.
JR
| |||||
| 3547.2 | Advise against give customer IRIS, it's internal tool.... | NETCAD::BATTERSBY | Don't use time/words carelessly | Wed May 22 1996 14:38 | 4 |
John his *customer* can't use IRIS it's an internal tool.
Bob
| |||||
| 3547.3 | KAOFS::S_HYNDMAN | Zoom Splat Pilot | Thu May 23 1996 13:07 | 6 | |
I would think that you could do this by creating a domain with only
decnet as the protocol and enabling converstations logging.
Scott
| |||||