[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3504.0. "ds900et core dump" by CSC32::D_PERRIN () Thu May 02 1996 21:52

    A customer has a brand new decswitch 900et in a dechub one.
    He can see it from Hubwatch/osf 4.1.1, but when he clicks on the
    module, he gets a core dump.
    
    I'm trying to get details on the core dump to post. Anybody have 
    info on this? 
    
    thanks
T.RTitleUserPersonal
Name
DateLines
3504.1more ???CSC32::D_PERRINFri May 03 1996 14:565
    While we're at it, is there bridging code for the 900et or does it
    only run bridge/router code? I suspect the answer is no, but this
    same customer was told by somebody that it would. He was also
    told that it wouldn't work in a dechub 900, only a hubone???
     
3504.2CSC32::D_PERRINFri May 03 1996 15:093
    In case it helps, the core dump from the customer can be found
    at CSC32::DUMPS:[COLTER]HUBWATCH.DMP;1.
    
3504.3hub900 ok.MARVIN::MUNSLOWFrom the pain come the dream, from the dream come the visionTue May 14 1996 19:5014
    
    re .1
    
    	900et does work in decHub900, I have two sitting next to me working
    	away quite happily.
    
    I don't think that there is any bridge code, just the bridge/router
    stuff.
    
    	Do we know state the router is in? he ran through qconfig or
    	just configured the In-band IP address through the console port?
    
    regards
    	andy
3504.4CSC32::B_GOODWINMCI Mission Critical Support TeamTue May 14 1996 20:047
Andy,

It was configured through qconfig. Both the TR interfaces and the Enet interface
was configured to run IP. I can telnet to the console from d.unix, but when
spawning a telnet session from hubwatch, it core dumps.

Brad
3504.5DETER not supported in HUBwatch V4.1NPSS::WADENetwork Systems SupportWed May 15 1996 12:528
    
    The DETER shipped very late in the HUBwatch 4.1 cycle.  In fact 4.1 was
    already out and the DETER was not available for testing against
    HUBwatch 4.1.  The bottom line is that the DETER is supported in the
    clearVISN product set.                           
    
    Bill
    
3504.6CSC32::B_GOODWINMCI Mission Critical Support TeamWed May 15 1996 13:274
    Will it be added to the clearVISN product set?
    
    Brad
    
3504.7NPSS::WADENetwork Systems SupportWed May 15 1996 13:328
From .5
          
  	> The bottom line is that the DETER is supported in the
    	> clearVISN product set.                           
          
    Bill
    
    
3504.8CSC32::B_GOODWINMCI Mission Critical Support TeamWed May 15 1996 15:353
opps, sorry I mis-read .5, It was early this morning .. ;-)

Brad