Conference netcad::hub_mgnt

3451.0. "tiny colored plastic port-type selectors?" by UTOPIE::FRUEHWIRTH_M () Mon Apr 15 1996 17:01

hi all,

i've a question about 'labeling' MIC-PMDs.

there are 3 tiny colored plastic port-type selectors for marking
a MIC-connector as a specific type (A-red, B-blue, or M-green) on 
each end of a DEC-MIC-cable.

on the opposite side, on the MIC-PMD, there is also the possibility 
to mark it as a specific type with 4 tiny colored plastic port-type 
selectors (A-red, B-yellow, M-white, S-blue).

our customer is configuring their DECconcentrator900MXs (7 pieces) 
with each 6 M-ports, and they want to put the selectors on all the 
DECconcentrator900MXs and cables.

in a box with one DECconcentrator900MX (preconfigured with 6x MIC-PMD)
only one small plastic bag with these selectors is delivered.

there is no part-number on the small plastic bag, so logistic was 
not able to help me.

my question: where can i get additional selectors for the MIC-PMDs?
	     do you have a part-number or a better description
	     for these 'tiny colored plastic port-type selectors'?

thanks in advance 
martin

ps: posted in FDDI an HUB_MGNT

    see note #3461.