[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3443.0. "PMD of concentrator 900 MX appears blank" by COLNSB::STICHTERNATH () Thu Apr 11 1996 15:07

    Hi together,
    
    i have some problems with a concentrator 900 MX in conjunction with
    Hubwatch 4.1. . 
    I instaled a HUB backplane with SW REV. 4.0.4.
    The following Modules are installed:
    
    900MX HW 2.0 ROM 1.4     SW 3.22
    900MX HW 2.0 ROM 1.4     SW 3.11
    
    900EF HW 1.2 ROM 0.4     SW 1.5.0
    
    900FP HW 2.0 ROM 0.1.0.4 SW 2.0
    900FP HW 2.0 ROM 0.1.0.4 SW 2.0
    
    900TP HW 3.0 ROM 0.0.0.3 SW 2.01
    
    at first all things worked fine, that means all details of the PMS's
    were displayed in HUBwatch. But after several starts of
    HUBwatch and upgrading the Bridge Software to Version 1.5.2 
    the Concentrator PMD's in HUBwatch appears blank.In a second Hub which
    Configuration and releases of the Modules are nearly the same all
    details are displayed normal.
    While double-clicking the PMD-Module the following Error Message
    appears:
    "no agent found for specified MAC-Address"
    
    is there anyone who can help me ??
    
    thanks in advance
    Volker
T.RTitleUserPersonal
Name		DateLines
3443.1NETCAD::MILLBRANDTanswer mamThu Apr 11 1996 15:478
You need HUB firmware at 4.1.x and HUBwatch at 4.1 
to go with 900EF 1.5.2, 900 repeaters at 2.x, and 900 concentrators
at 3.1.x or 3.2.x.

If you are VMS-challenged and HUBwatch 4.1 isn't available
for VMS yet, at least try the hub upgrade.

	Dotsie