[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:NETCAD::COLELLADT
Created:Wed Nov 13 1991
Last Modified:Fri Jun 06 1997
Last Successful Update:Fri Jun 06 1997
Number of topics:4455
Total number of notes:16761

3439.0. "HBFIRM412 on CD not installable" by PRIVAT::OTTO (getting better all the time) Thu Apr 11 1996 06:47

Hello ,

I don't know whether I should open an IPMT 
(or whether an IPMT is the right way to report this) on this 
but fact is that on the consolidated CD of January 96 for DEC UNIX 
the kit for the HUB Firmware V4.12 is defect /not installable.
.
.
You are installing the following optional subsets:

        DEChub Consolidated Firmware for Digital UNIX

Is this correct? (y/n): y

Checking file system space required to install selected subsets:

File system space checked OK.

DEChub Consolidated Firmware for Digital UNIX
   Copying from . (disk)
/usr/sbin/setld: /cdrom/hfw41b/kit/HBFIRM412: cannot open
tar: No input
setld:
File copy to system disk failed.

Subset HBFIRM412 may not have been installed properly on your system
but the rest of the installation will continue.
   Verifying
setld:
There were verification errors for "DEChub Consolidated Firmware for 
Digital UNIX" (HBFIRM412)
         

In this case it was no problem since the only difference between V4.1.1
and 4.1.2 is a new Image for the  PORTswitch 900CP which the customer does 
not have.

But maybe someone who builds the kit can verify that it is installable from 
CD as well.



thanks 


OTTO
T.RTitleUserPersonal
Name		DateLines