|
Hello all together,
It is really interesting, i think there must be already a
Bug-Fix for the DEFMM (Portswitch 900FP), because the Release
Notes for the Version V2.2 March 1996 are already available by Tima
Tools! The Release Notes says:
Previously under certain conditions, when You useed the Hubwatch Inter
connect window to disconnect the Thinwire port, either the front panel
Network OK LED (that indicates the status of the backplane Thin Wire
port) or Hubwatch may have indicated that the Thin Wire port was
disconnected. This might not actually have been the case. The Thin Wire
port might have remained connected, and traffic might still have gone
through the modules backplane Thin Wire port.
This condition has been corrected.
In the Release Notes is also explained, how to get with anonymous ftp
the firmware Images. But in these Directory ist still the old Image!
So, please can somebody from the Engineering give the POINTER, where
this Image can be found?
I think these would help us, and our Customers,
Thanks a lot
Daniel MCS Switzerland
|
|
Hello all,
I hope, the Pointer in Note 3306.2: NPSS::PUBLIC$DSK:[INTERCHANGE]
DEFMM_V2_2B000.BIN;1
for the Portswitch 900FP solves these Problems, as i asked in 3346.2
I hope, that the Release Notes from Tima Tools for Version V2.2 also
belong to these Images.
Thanks in advance for the confirmation of my Question,
Daniel
|