[Search for users] [Overall Top Noters] [List of all Conferences] [Download this site]

Conference netcad::hub_mgnt

Title:	DEChub/HUBwatch/PROBEwatch CONFERENCE
Notice:	Firmware -2, Doc -3, Power -4, HW kits -5, firm load -6&7
Moderator:	NETCAD::COLELLADT

Created:	Wed Nov 13 1991
Last Modified:	Fri Jun 06 1997
Last Successful Update:	Fri Jun 06 1997
Number of topics:	4455
Total number of notes:	16761

3329.0. "How do I attach a DEChub900 to a DELNI???" by SCASS1::GALVIN (The Energizer Bunny's Trainer...) Wed Mar 06 1996 12:43

    		Connect a DEChub900 to DELNI
    
    We've got a dh900 with a DECswitch900 that's got routing turned on.  I
    setup the AUI port, (#2) and have it connected to a DELNI.  It's setup
    for IP and the IP address is 166.34.121.239 and my mask is
    255.255.255.0
    
    I tried to configure port #3 to be a 166.34.114.X network with hopes
    that I could use a 32port repeater and set it up as a 166.34.114.X
    LAN.
    
    I want the DECswitch to act as a router, but I can't get it to
    recognize the repeater... 
    
    Can someone point me to reading material or answer my question?  How do
    people attach a DEChub900 if they are using a DELNI?
    
    thanks,
    
    /Mic

T.R Title User Personal
Name Date Lines

3329.1 CSC32::B_GOODWIN MCI Mission Critical Support Team Wed Mar 06 1996 15:19 7

T.R	Title	User	Personal Name	Date	Lines
3329.1		CSC32::B_GOODWIN	MCI Mission Critical Support Team	`Wed Mar 06 1996 15:19`	7
	Mic, It should work ok, I've done it. Are you sure port 3 is connected to the same lan interconnect on the hub backplane as the repeater? To see this, look in hubwatch view menu and select lan interconnect. Brad

Mic,

It should work ok, I've done it. Are you sure port 3 is connected to the same
lan interconnect on the hub backplane as the repeater? To see this, look in
hubwatch view menu and select lan interconnect.

Brad